Kategori: SANWA


The STD5000M is a calibrator with soft touch buttons that can generate a desired DC voltage/current AC voltage/current, resistance, frequency, etc. with a high degree of accuracy and stability. Ranges : Voltage : (DC-AC) : 0-1000V (6 ranges) Current (DC-AC) : Read more…


Specification : Digital Type General-purpose DMM kit 3-3/4 digits 4000 count Capacitance measurement (40nF-100 µ F) Data hold/Range hold Safety cover for the µ A-mA Tilt stand Optica, link RS232C/USB interface (optional) Display : Numeral display 4000 Sampling rate : Read more…


Specification : Analog Type Learning kit Designed for measurement of small capacity electric circuits Drop shock proof taut0band meter Battery check Meter zero adjuster Zero Ω adjuster Protective body cover


Thermo meter with pocket type. Specification : Easy to carry in shirt pocket Sensor prove can be snapped into a fixed position atop the case Dat hold, Max/Min hold Relative value Nonslip sensor holder Auto power save (30 min)


Specification : Motor rotation direction testable Phase sequence and open phase checking of three-phase lines Rotation direction check by turning three-phase motor shaft manually Bright LED indication


Specification : Phase sequence and open phase check Large size alligator clips KS1 Measurement Open phase sequence Voltage Range 3 phase AC 100V-600V Frequency 45Hz~70Hz Time limit AC110V : Continuous, AC220V : 3 hours, AC480V : 12 minutes Fuse 0.2A/250V Environment Read more…


Specification : Beeping and LED lighting upon detection Switchtable to measure cord or bare wire KD2 Measurement Voltage Detection Voltage range AC80 to 600V, 50/60 Hz Compatible Conductor Cord and bare wire Withstand voltage AC200V for 1 minute Indicator Beep Read more…


LCR Meter useful for sorting device value. Measuring frequency DC-100kHz Ls/Lp/Cs/Cp measurement with sub parameters (D/Q/ Ø /ESR) Automatically selectable L/C/R measurememt Device sorting mode Optical link USB interface (optional) Dta hold, Back light Sampling rae : (1.2 times/ sec (LCR mode) ; (0.5 times/second (DCR Read more…


Earth Tester type Analog Phase detection system circuit for stable measurement Easy self calibration AC 30V range to avoid indication errors caused by leak current Power saving design with push switch Auxilliary grounding value excees indicator lamp Earth resistance measuring Read more…


For Elevator maintenance, 2ch display Suitable for elevator speed measurement of high building 2 independent display Analog output terminal to record measuring data 2 external hold terminals for remote control Easy to read LED display Remote control by external encoder Read more…


Tachometer non contact type digital tachometer. Designed for ease of holding to enable stable measurement Max/Min value hold Auto power off (2min) (cancelable) Fixed installation posible using a commercially available camera tripod Contact measurement (optional ENC-3) Optional Accessories SE-T3


Laser Power Meter Digital Type.For space light measurement. Silicone photodiode Measurable up to 50.00mW Relative value Max. hold, data averaging (20-data sequental averaging) Direct reading wavelength (488.633.670.780.830mm) RS-232C interface Display 4-digit digital Ranges Automatic, 5 ranges Optical sensor Si photodiode Read more…


Optical power ip to max. 40mW measurable direct reading wavelength customization. Wide optical power measuremnt range Silicone photodiode Sensor can be all neatly contained and protected within the folding case. Max/Min hold Auto power save (30min) 500mm sensor cord Optical Read more…


Optical Power Meter for fiber light (short wavelength 5 ranges).Optical FC type fiber conector. dBm and W measurement Relative value Offsetting, data averaging (20-data seqential averaging) Direct reading wavelength (650, 780, 800, 850, 880nm) RS-232C interface Various connectors can be Read more…


Lux meters with Analog type. Max 1000 lux measurable. Various light source can measured such as filament lamp, fluorescent lamp, and mercury lamp. Silicon photodiode Taut-band drop shock proof meter Range 100/300/1000/3000/10000LUX Accuracy ±10% of full scale Receiver angle 30* Read more…


Lux meter with pocket size.  Small thick shape sensor probe (sensor diameter ɸ 9mm) 3999 count with analog bar graph Silicon photodiode Measuring range 0.1|x-399.9klx Data hold Auto power save (30min) Cord length 900mm Optical sensor Si photodiode with approximated relative luminious efficiency (∅9mm) Read more…


Analog Multitester for power line. Current limiting fuse100kA breaking capacityis installed For lower voltage circuit (500V and below) with large capacitance Current-limiting fuse that can interrupt 100kA, is installed All renges are protected from input voltage up to 500V Carrying Read more…


Analog Multitester with Slim compact AMT .Small pocket size. Elastomer material absorbs shock from fall High-durability nylon-woven copper lead Using elastomer material improves flexibility and reduces the stress on the lead wire the probe when bent. Bandwidth : 40-10kHz (50V and below)


Analog Multitester with Slim compact ATM .23mm thick small size. Wide scale panel with mirror Afixed test leads providing better safety High-protection, non-flammable, smokeless metal-oxide film resistor Battery check Fise and diode circuit protection Bandwidth : 30-100kHz (AC10V), 30-20kHz (AC50V)


Analog Multitester with Drop shock proof meter .30A range for automotive. High level panel visibility Continiuty check buzzer Tilt-stand Measurable up to DC30A/DC30A with optional clamp probe Bandwidth : 40-5kHz


Analog Multitester with Drop shock proof meter  Protectiv body cover Low power ohm (3V) measurement upto 200M Ω Capacitance measurement 0.01 µ F- 1000 µ F LED check by 3V terminal voltage at resistance range Battery check Protective body cover Read more…


Analog Multitester with Drop shock proof meter .DC high voltage Temperature measurable 20ch measurement ranges Capacitance measurement 500 µ F Tilt stand DC high voltage and temperature measurement (with optional accessories) Bandwidth : 40-100kHz (AC12V)


Analog Multitester with Drop shock proof meter and continiuty check buzzer. Drop shock proof auto-band meter ± DCV cero center meter Fuse and diode protection Battery check Tilt stand Bandwidth : 40-100kHz (AC12V)


Analog Multitester with Drop shock proof meter. Drop shock proof meter Null (zero center) meter ± 5/ ± 25 in DVC High resitance up to 200M Ω with low voltage Protective body cover Capcitance, dB, Li measurement Bandwidth : 3-100kHz Read more…


Analog Multitester with High input impedance and Auto range. Auto range selection (V, Ω ) Auto polarity High input impedance 1-10M Ω Series capacitor input AU-31 ACV only Auto 0 Ω adjustment Inner battery check DC/VC auto selection AU-32 only Read more…


Analog Multitester with multifunctional. Sanwa SH-88TR Zero center meter (NULL) Total 35 wide ranges (22ch sw + additional functions) Capacitance measurement 1 µF-1F LED for continiuty check


Analog multitester wide measurement range. Total 35 wide ranges (24ch sw + additional functions) ± DCV zero center meter LED for continiuty check OUTPUT terminal (series capacitor terminal) Battery check


Analog Multitester with multifunction model. Capcitor & Transistor checker (built-in-oscillator) 26ch switch, wide range measurement Capacitance measurement 50pF-2000 µ F High input impedance 50k Ω / V (DC3-300Vrange) Switchable DC polarity Bandwidth : 40Hz-30kHz (3V and 12V); 40Hz-10kHz (30V range)


Analog Multitester with FET tester. High sensivity for measurement of lower capacitance. High input impadance (DCV2.5-12M Ω /V), and 0.12 µ A range (DCA) Bandwidth 40Hz-1MHz AC sign wave Rectangular pulse P-P (Peak to Peak) measurement (duty cycle 20% and Read more…


Digital Multimeter with Pocket type and Solar charge battery DMM 3-3/4 digits 4000 count 0.7% best accuracy Range hold Auto power off (15min) Low power ohm (input voltage 0.4V) at continiuty range Power saving design Display : numeral display 4000 Read more…


Digital Multimeter with pocket type and Updated longtime seller 3-3/4 digits 4000 count 0.7% best accuracy Range hold Auto power off (15min) Low power ohm (input voltage 0.4V) at continiuty range Power saving design Display : numeral display 4000 Sampling Read more…


Digital Multimeter With Tough Body but Compact DMM 3-3/4 digits 4000 count 0.8% best accuracy Analog bar graph Compact storage of test leads Test lead can be snapped into a fixed position atop the case Display : numeral display 4000, Read more…


Digital Multimeter with 8.5mm thick body and multi-function 3-3/4 digits 4000 count 0.7% best accuracy Capacitance measurement (not suitable for measurement of condensors with large leak current) Frequency measurement (AC sine wave only) Duty cyle Data hold Relative value Auto Read more…


Digital Multimeter with True RMS, Pocket size DMM 6000 count AC True RMS Data hold Relative value measurement MAX/MIN value recording mode Auto power save (15min) (cancelable) Stylish carrying case provided as standard accesory Display : numeral display 6000 Sampling rate : 5 times/sec


SANWA PM33a : Multimeter + Clamp Meter ; Hybrid pocket size DMM + Clamp meter Lightweight approx.160g Max/Min. value hold Current measurement with thin U-shaped current sensor (7mm) at angles of 0 and 180 degrees AC and DC currents measurable Read more…


CAT.IV Volt Tester AC True RMS Self test-checking failures of LCD, disconnection of a lead wire EF (Electric Field) detection LCD with backlight & LED light to dark place Auto data hold Auto power off (1min) Display : numeral display 9999 Sampling Read more…


Digital Multimeter with TRUE RMS, CAT.IV DMM 6000 count AC True RMS Data hold/Range hold Relative value measurement MAX/MIN value recording mode LCD with backlight Auto power save (15min) (cancelable) Attachment body cover for protection EF (Electric Field) detection Display : numeral display 6000 Sampling rate Read more…


Digital Multimeter with : ALL IN ONE DMM True RMS Portable DMM SPECIFICATIONS : 6000 count AC True RMS Data hold/ Range hold Relative value measurement MAX/MIN value recording mode LCD backlight Auto power save (15 min) (cancelable) Attachment body Read more…


Digital Multimeter ALL IN ONE DMM.Tough Body Cover 3-3/4 digits 4000 count 0.7% best accuracy Capacitance measurement (Not suitable for measurement of condensors with large leak cureent) Frequency measurement (AC sine wave only) Data hold/Range hold Relative value Auto power Read more…


Digital Multimeter with high input impedance 1000m Ω 3-3/4 digits 4000 count 0.3% best accuracy AC true RMS (RD701 only) Capacitance measurement *not suitable for measurement of considensers with large leak current K type temperature *Optional accessory K-AD is necessary; *K type temp. sensor K-250PC is Read more…


Digital Multimeter with Multifunction, High-speed bar graph & Cont.buzzer with LED. 6000 count Using fire-reatrding materials for holster and circuit board Wide-range capacitance measurement (0.01nF to 3999 µ F) Data hold/ Range hold Safety cap on 6 . 15A terminal Read more…


Digital Multimeter with True RMS new standard Backlight & Temperature measurement 3-3/4 digits 4000 count AC true RMS Easy to read large LCD with backlight Large breaking capacity fuse 30kA K-type thermocouple temperature measure ment-20◦C-300◦C Thermo plastic elastomer, high resistance Read more…


Digital Multimeter with Multifunctional new standardBacklight & cont. buzzer with LED Specifications : 3-3/4 digits 4000 count Easy to read large LCD with backlight Large breaking capacity fuse 30kA 1.5V battery check function Thermo plastic elastomer, high resistance against drop Read more…


Digital Multimeter with new standard : 3-3/4 digits 4000 count Easy to read large LCD Thermo plastic elastomer, high resistance againts drop shock Safety cap on current terminal Data hold, Range hold, Relative function Continiuty check, diode test Auto power Read more…


SANWA PC20 : * Data processing (PC Link); *AC adapter conectable for long haul measurement. Specifications : 3-3/4 digits 4000 count 0.5% best accuracy Capacitance measurement (Not suitable for measurement of condensers with large leak current) Data hold/Range hold Safety Read more…


Hybrid pocket size M Ω Tester + Clamp Meter. Lightweight approx. 160g Easy to use, pocket size ACV / DCV measurement range DCA / ACA measurement range Inorganic EL backlight Current measurement with thin U-shaped current sensor (7mm) at angles of Read more…


Hybrid pocket size M Ω Tester + Clamp Meter. ■Lightweight approx. 160g■Easy to use, pocket size■ACV / DCV measurement range■DCA / ACA measurement range■Inorganic EL backlight■Current measurement with thin U-shaped current sensor (7mm) at angles of 0 and 180 degrees■Data hold■Measurement Read more…


Single test voltage ramge Test voltage DC500V-100MΩ One-shot or continuous measurement push switch DCV measurement range (DC60V) Auto discharge function Inner battery check range ACV meaurement range Shoulder Strap PDM509S  Insulation Resistance (MΩ) 0.05-0.1-50-100MΩ                Accuracy ± 5% of reading (1st effective measurement Read more…


Pocket size, 7 set voltage ranges. Test voltage selection made LED level meter shows MΩ eASY TO READ LCD with fixed decimal point Automatic data hold function LCD with backlight and LED light for dark place Sampling rate : approlx. Read more…


Allows you to measure insulation resistance more safely by avoiding operation mistakes. Hot-line state (30V minimun) detection Large volt mark with buzzer sound Automatic data hold function Baragraph just like analog meter Large display with backlight Easy to use & Read more…


Allows you to measure insulation resistance more safely by avoiding operation mistakes. Hot-line state (30V minimun) detection Large volt mark with buzzer sound Automatic data hold function Baragraph just like analog meter Large display with backlight Easy to use & Read more…


The measurement of insulation resistance is performed to check insulation status of electric equipments and circuits, which constitutes one of impartant measuring items for safety control. The measurement of the insulation of electric equipments and circuits is made using an Read more…


Clamp Meter Leak Current Multinational lo Leakage Clamp Meter Low-pass filter function cuts current value of high frequency Max/Min value hold, Data hold Backlight Auto power save (30min) Sampling Rate : 2 times/sec DCL460R Measuring Range Accuracy  Resolution ACmA 60m/600mA ± (1.2%+5) 0.01mA ACA Read more…


Suitable for maintanance of vehicle, hybrid vehicle, electric vehicle & DMM functions. AC/DC current measurable max.600A True RMS Peak hold (1ms) : when the peak button .is pressed, the measuring range will be fixed to the 600A range. Relative value measurement Read more…


DC/AC current measurable max. 2000A & DMM functions Dual display shows voltage/current and its frequency True RMS EF (Electric Field) sensing VFD (Variable Frequency Drive) frequency measurement Low input impedance voltage measurement capable of attenuating the effects of ghost voltage Read more…


DC/AC RMS mini clamp meter with peak hold function. True RMS Compact pocket size Peak hold Data hold Backlight Auto power off (approx 15 min) (cancelable) Sampling Rate : 2 times/second DCL31DR Measuring Range Best Accuracy  Resolution ACA 60/400A ± Read more…


Low Cost & DMM functions- True RMS- Measurable AC 0.1A-600A- ACV & Resistance measurement-Small design & easy to carry- Data Hold- Continiuty check buzzer- Sampling rate : approx 2 times/sec- ac Frekuensi : 50-400Hz DCM60R Measuring Range Best Accuracy  Resolution Read more…


ZZRMS lightweight & DMM functions* Lightweight approx 290g* True RMS* lARGO LCD with backlight* Easy to use large size data hold button* AC voltage detection function (EF)* Auto V/ Ω  detection * MAX. 1200A measurable* Display : numersl display 6000 Read more…


RMS mini clamp meter with backlight P Product Detail : * True RMS* Compact pocket size* Data Hold* Backlight* Auto power off (approx 15 min) (cancelable)* sampling rate : approx 2 times/sec DCL1000 Measuring Range Best Accuracy  Resolution ACA 60/300A Read more…


Suitable for automotive maintenance & DMM functions Detail Product* 4000 count/ 42 segment analog bar graph* DC/AC current 40A/400A* Data hold/ Range hold* Relative Value* Continiuty check buzzer* Auto power off (30min)* Low battery power indication* Display : numeral display Read more…


Description Product : DC/AC current measurable max. 200A Continuity check buzzer Data hold Slim core for narrow space Display : numeral display 1999 Sampling rate : 2 times/sec AC frequency bandwith : 40 – 400 Hz (ACA), 40 – 500 Read more…


AC600A, AMT Functions Detail Product : AC current measurable max. 600A Long analog pointer with “pointer lock” function Temperature measurement with optional probe Display : ANalog pointer AC Frequency bandwith : 50/ 60 Hz CAM600S Measuring Range Accuracy  ACA 6/15/60/150/600A Read more…


Detail Product : 4000 cont/ 42 segment analog bar graph Frequency measurement by clamping and using test led Data hold Continuity check buzzer Auto power off Low battery power indication Sampling rate : 2 times/ sec DCM400 Measuring Range Best Read more…


Lightweight approx . 290g Larga LCD Easy to use large size data hold buttom Sampling Rate : 3 times/second DCL1000 Measuring Range Best Accuracy  Resolution ACA 400/1000A ± (1.7%+5) 0.1A ACV 400m/4/40/400/600V ± (1.2%+3) 0.1mA DCV 400m/4/40/400/600V ± (2.2%+5) 0.1mV Read more…


DC CURRENT : R03 x 2; Length : 1.8m; Battery Life : approx 70H CL33DC DC300A DC30A Applicable digital multimeter     Resolution  0.1A 0.01A PC7000 PC720M PC710 PC700 PC500a PC510a PC773 CD772 CD771 CD770 CD750 CD731a CD732        Read more…


Detail Sanwa Clamp Meter DCL30DR Product Details DCL30DR Clamp Multimeter 400A ac DC/AC RMS mini clamp meter with peak hold function True RMS Peak hold (10ms) Backlight Marks to make sure the object is properly clamped Data hold Auto power Read more…


AC current,Flexible type Detail Sanwa Clamp Sensor CL3000 :  CL3000 AC30/300/3000A Applicable digital multimeter Accuracy ± (2%+0.3%+FS) PC7000 PC720M PC710 PC700 PC773 PC20 RD701 RD700 CD772 CD771 CD770 CD750P CD731a Frequency Range 45-65Hz Output inpedance 250Ω and less TA55 (Analog) Read more…


2 Test voltage ranges for elevator maintaenance Test voltage DC500V/15V Auto range Auto power off (1min) Low battery indication Remote speed measurement (speed meter SE-900 is necessary) Display : numeral display 1999 PDM53 MΩ 2/20/200MΩ (3 auto ranges)                 Accuracy  Within ±(2%+2) ACV 200/750V (2 auto Read more…


PC700 Digital Multimeter : Dual Display, Best Accuracy 0.06% 4 digits 9999 count & 3-5/6 digits 6000count Maximum DC/AC voltage measurement resolution 0.01mV Dual Display shows voltage/current and its frequency, and AC components and DC components of voltage/current High speed Read more…


Detail SANWA CLAMPMETER AC CAM600SSPESIFIKASI DETAIL Tang Ampere Analog AC Sanwa CAM600S  CAM600S  Rentang Pengukuran   Akurasi AC A 6/15/60/150/600A ±3% berskala penuh AC V 150/300/600V ±3% berskala penuh DC V 60V ±3% berskala penuh Resistansi 1k/100kΩ 3% lengkungan Suhu  -10~+200°C Bandwidth Read more…


Suitable for  electric work and air conditioning & DMM functions. Detail Sanwa Clamp Meter DCM660R : AC current measurable max. 660A True RMS Inrush current measurement Max/Min value hold Frequency measurement by clamping and using  test lead Data hold, Auto Read more…


Detail Sanwa Analog Type PDM5219S Manufacturer Specifications: ■Test voltage 500V /250V/125V■Easy viewing and readable scale graduations■One-shot or continuous measurement push switch■DCV measurement range (DC60V)■Auto discharge function■Inner battery check range■Shoulder Strap PDM5219S Insulation Resistance (MΩ) 0.02-0.1-50-100MΩ 500V/250V/125V               Accuracy ± 5% Read more…


High Accuracy and Multi-Function. True RMS, Dual Display Specifications PC700 Digital Multimeter  4 digits 9999 count & 3-5/6 digits 6000count Dual Display shows voltage/current and its frequency, and AC components and DC components of voltage/current AC True RMS EF (Electric Read more…


High Accuracy and high resolution  PC700 Digital Multimeter : Dual Display, 500000 count for DVC 4-4/5 digits 5000 count (selectable 5-4/5 digits 500000 count for DCV) Dual Display shows voltage/current and its frequency, and AC components and DC components of Read more…


Detail Sanwa Clamp Sensor CL140 Sanwa Clamp Meter CL140 Micro / leak current (AC) No battery CL140 1A Applicable digital multimeter Resolution 1mA PC7000 PC 720M PC 710 PC 700 PC 5000A PC 510A PC 500A PC 773 RD 701 Read more…


Detail Sanwa Clamp Meter DLC 460F CLAMP METER DLC460F Multifunctional lo Leakage clamp Meter DLC460F Measuring range Best accuracy Resolution Low pass Filter Function cuts current value of ACmA 60m/600mA (1.2%+5) 0.01mA high frquency Max/Min value hold, Data hold ACA Read more…


Detail SAnwa 3phase Detector KS3 KS3 Motor -rotation direction testable KS3 Phase seguence and open phase checking of Measurement Moter rotation direction,open phase and phase seguence three-phase lines voltage range 3 phase, line voltage:AC75 500V (sine wave,continuous) Rotation direction check Read more…


Detail SANWA CLAMPMETER AC DCL1000 SANWA DCL 1000 Tang Ampere Clamp Meter SANWA DCL 1000 Tang Ampere Clamp Meter DCL1000, Sanwa Clamp Meter DCL1000, Lower fungsi biaya ringan & DMM Fitur Dasar * Ringan approx. 290g * Large LCD * Read more…


Detail Sanwa Clamp Meter DCL 3000R Fitur Clamp Meter Sanwa DCL3000R : ■ Flexibility facilitating conductor clamping even in narrow space ■ AC current measurable max. 3000A ■ True RMS ■ Data hold, Max/Min value hold ■ Backlight Sampling rate Read more…


Detail Sanwa Clamp Meter DCL 3000R Fitur Clamp Meter Sanwa DCL3000R : ■ Flexibility facilitating conductor clamping even in narrow space ■ AC current measurable max. 3000A ■ True RMS ■ Data hold, Max/Min value hold ■ Backlight Sampling rate Read more…


Single test voltage range : Test voltage DC1000V-2000MΩ One-shot or continuous measurement push switch DCV measurement range (DC60V) Auto discharge function Inner battery check range ACV meaurement range Shoulder Strap DMS1009S  Insulation Resistance (MΩ) 1-2-1000-2000MΩ                Accuracy ± 5% of Read more…


Detail Sanwa Clamp Meter DCM2000DR Sanwa Clamp meter DCM2000DR DC / AC current measurable max. 2000A & DMM Functions Dual display shows voltage/curren and its freguency True RMS EF (Electric Field) sensing VFD (Variable Freguency Drive) Freguency measurement Low input Read more…


SANWA PC773 : 11000 count, Minimun resolution 0.01mV, 0.01Ω ■4-1/2 digits 11000 count ■0.28% best accuracy ■AC True RMS ■Thermo plastic elastomer, high resistance  against drop shock ■Maximum DC/AC 11A can be measured ■Continuity buzzer and LED ■Data hold, Range Read more…


Detail SANWADCM400 Sanwa DCM 400AD Clamp Meter Basic Features 4000 count / 42 segment analog bar graph DC / AC current 40A/400A Data hold / Range hold Relative value Continuity check buzzer Auto power off (30min.) Low battery power indication Read more…


Detail Sanwa CLamp Meter DC/AC DCM-22AD SPESIFIKASI  DCM-22AD  Pengukuran Rentang  Akurasi  Resolusi  ACA 20/200A ± (2% + 5) 0.01A DCA 20/200A ± (2% + 2) 0.01A ACV 2/20/200/500V ± (2% + 5) 0.001V DCV 2/20/200/500V ± (1.5% + 2) 0.001V Read more…


Detail Sanwa Analog Type PDM1529S Manufacturer Specifications:   ■Test voltage DC1000V / 500V /250V ■Easy viewing and readable scale graduations ■One-shot or continuous measurement push switch ■DCV measurement range (DC60V) ■Auto discharge function ■Inner battery check range ■Shoulder Strap   Read more…


Detail Sanwa PC720M SANWA PC720M 4 digits 9999 count & 3-5/6 digits 6000 count ■AC True RMS ■Dual display with backlight ■Automatic measurement for ACV/DCV/Ω under  low impedance ■High speed bar graph ■Capacitance measurement ※Not suitable for measurement of condensers Read more…


Hybrid pocket size M Ω Tester + Clamp Meter. ■Lightweight approx. 160g■Easy to use, pocket size■ACV / DCV measurement range■DCA / ACA measurement range■Inorganic EL backlight■Test leads holder with thermo plastic elastomer which is easy to reel■Current measurement with thin U-shaped Read more…


Clamp Sensor DC/AC current  R03 X 2 Length : 1.8m, Battery life : approx.70H CL-22AD DC200A DC20A AC200A AC20A Applicable digital multimeter Resolution  0.1A 0.01A 0.1A 0.01A PC7000 PC720M PC710 PC5000a PC500a PC773 PC20 RD701 RD700 CD772 CD771 CD770 CD731a Read more…


Detail SANWA CLAMPMETER AC+True RSM SANWA DCL20R Clamp Meter Description Country of origin JAPAN Dimensions, mass AC A Measuring range : 60/300A Best accuracy : ±(1.9% +5) Resolution : 0.01A Bandwidth 50/60Hz, 45~400Hz Display 6000 Clamp diameter/Conductor Size 25mm/10x25mm Withstand Read more…


Detail SANWA CLAMPMETER DC/AC DCL1200R Specifications Sanwa DCL 1200R AC Clamp Meter Basic Features Lightweight approx. 290g True RMS Large LCD with Backlight Easy to use large size data hold button AC voltage detection function (EF) Auto V / Ω Read more…


Single test voltage range Test voltage DC1000V-2000MΩ One-shot or continuous measurement push switch DCV measurement range (DC60V) Auto discharge function Inner battery check range Shoulder Strap DMS509S  Insulation Resistance (MΩ) 0.5-1-500-1000MΩ                Accuracy ± 5% of reading (1st effective measurement Read more…

CONTACT US

PT. SRIAYU MULTI KREASI

Jl.Hayam Wuruk Gedung Harco Glodok Lantai 5 Blok A.42 Glodok – Jakarta Barat

Telepon :

021-62305566 / 021-22687001

Email : ptsriayumultikreasi@gmail.com / marketing@ptsriayumultikreasi.com

PRODUK KAMI

VISITOR