Offset Caliper

SERIES 573, 536-ABSOLUTE Digimatic and vernier type

• The beam-mounted jaw can be adjusted to facilitate measurement of stepped sections and hard-o-get-at workpiece features
• Digital modes are IP67 Absolute type. No need to  reset the origin after switching on.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector.

Offset Centerline Caliper

• Specially designed for hole Center-to-Center measurements on the same, or offset, planes.
• Digital modes are IP67 Absolute type. No need to reset the origin  after switching on.
• Direct reading of pitch measurement is available due to  the offset-value setting function
• Allows integration into statistical process control and measurement system for models with measurement data output connector.

ABSOLUTE Back-Jaw Centerline Caliper

• Specially designed to measure hole Center-to-Center distances
• Provided with jaws on the back of the slider, measurements can be read easily from above
• A digital model is IP67 Absolute type.
• Direct reading of pitch measurements is available due to the offset value setting function
• Allows integration into statistical process control and measurement systems for models with measurement data output connector
• Dedicated calibration inspection tools are available

SERIES 573-Center-to-Center and Edge-to-Center Types

• Specially designed to measure hole Center-to-Center distance
• Provided with jaws on the back of the slider, measurements can be read easily from above.
• A digital model is IP67 Absolute type.
• Direct reading of pitch measurements is available due to the offset value setting function
• Allows integration into satistical process control and measurement systems for models with measurement data output connector.
• Dedicated calibration inspection tools are available.

Point Caliper

• Narrow-tip jaws fit into very small grooves and track, making many previously difficult outside measurements far easier to obtain.
• Allows step measurement
• Digitals models are IP67 Absolute type. No need to reset the origin after switching on.
• SPC output models allow integration into statistical process control and measurement system.

Blade Type Caliper :

• The thin blade-type jaws fit into very small grooves and make previously difficult outside measurements far easier to obtain.
• The outside measuring faces are carbide tipped.
• Allows step measurement
• Digitals models are IP67 Absolute type. No need to reset the origin after switching on.
• Allows integration into statistical process control and measurement system for models with measurement data output connector.

SERIES 573,536-Knife-edge/Inside Groove/Point Jaw Type

• Specially designed for inside measurements in hard-t-reach places
• Digitals models are IP67 Absolute type. No need to reset the origin after swtching on.
• Allows integration into statistical process control and measurement system  for models with measurement data output connector.

 

Neck Caliper

• Can measure wall thickness inside bores and recesses
• Digital models are an IP67 Absolute type. No need  to reset the origin after switching on
• Allows integration into statistical process contrl and measurement systems for models with measurement data output connector.