Jln. Hayam Wuruk No. 2-5

Gedung Harco Glodok Lantai 5 Blok A.42 - Jakarta Barat


Digital Oscilloscope Siglent SDS2000X

Key Features :

  • 70 MHz, 100 MHz, 200 MHz, 300 MHz models
  • Real-time sampling rate up to 2 GSa/s
  • New generation of SPO technology
  • Waveform capture rate up to 140,000 wfm/s (normal mode), and 500,000 wfm/s (sequence mode)
  • Support 256-level intensity grding and color temperature display
  • Record length up to 140 Mpts
  • Digital trigger system
  • Intelligent trigger : Edge, Slope, Pulse, Window, Runt, INterval, Dropout, Pattern and Video (HDTV supported)
  • Serial bus triggering and decoder, supports protocols IIC, SPI, UART, RS232, CAN and LIN
  • Low background noise supports 1 mV/div to 10 V/div voltage scales
  • 10 types of one-button shortcuts, including Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweeps, Zoom and Print
  • Segmented acquisition (Sequence) mode, dividing the maximum recrd length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time segment to capture the qualifying event
  • History waveform record (History) function, the maximum recorded waveform length is 80,000 frames
  • Automatic measurement function on 37 parameters, supports statistics, Gating measurement, Math measurement, History measurement and Ref measuremet
  • Math function (FFT, addition, substraction, multiplication, division, integration, differential, square root)
  • High speed hardware based Pass/Fail function
  • 16 Digital Channesls (MSO), Maximum waveform capture rate up to 500 MSa/s, Record length up to 140 Mpt/CH
  • 25 MHz function/arbitrary waveform generator, built-in 10 types of waveforms
  • Large 8 inch TFT-LCD display with 800 * 480 resolution
  • Abundant interfaces : USB Host, usb Device (USBTMC), LAN (VXI-11), Pass/Fail, Trigger Out
  • Support SCPI remote control commands
  • Supports Multi-language diplay and embedded online help

Characteristics :

1 . 8 Inch TFT-LCD Display and 10 One-button Menus
– 8-Inch TFT-LCS display with 800*480 resolution
– Most commonly used functions are accessible using 10 different one-button operation keys ; Auto Setup, Default, Cursors, Masure, Roll, History, Display/Persist, Clear, Sweeps, Zoom and Print
– Support auto detection of 20X with read-out (200 MHz and 300 MHz version only)

2. Waveform Capture Rate up to 500,000 wfm/s
– Waveform apture rate up to 140,000 wfm/s (normal mode), and 500,000 wfm/s (sequence mode)
– Support 256-level intensity grading and color temperature display
– Record length up to 140 Mpts
– Digital trigger system

3. Record Length of up to 140 Mpts

4. 256-level Intensity Grading and Color Temperature display

5. Abundant trigger functions

6. Sequence mode
Segment memory collection will store the waveform into multiple (up to 80,000) memory segments and each segment will store a triggered waveorm, as well the dead time information. The dead time between segments could be as small as 2 μs. All the segments can be play back using History function.

7. History Mode
History function can record up to 80,000 frames of waveforms. The recording is executed automatically, so that the customer can play back the history waveforms at any time to observe unusual events, and locate the source quickly through the cursors or measurements. Located on the keyboard Panel, this function is easily accessible.

8. Comprehensive Statictical Functions
Parametric statistical function to display 5 parameters of any measurement: current, mean, minimum value, maximum value, and standars deviation. The measurement count is also displayed. The maximum number of measurement that can be run and simultaneously analyzed statistically is five. Supports gating measurements, math measurement, history measurement and Ref measurement.

9. Advanced Math Function
In addition to the traditional (+, -, x, /) operations, FFT, integration, differential, and square root operation are supported. The integration operation supports gating, which uses cursors to deine the domain of integration.

10. 16 Digital Channels/ MSO (Optional)
4 analog channel plus 16 digital channels enables users to acquire and trigger on the waveforms then analyze the pattern, simultaneously with one instrument.

11. Built-in MHz Function/Arbitrary Waveorm Generator (Optional)

12. Serial Bus Decoding Function (Optional)

13. Complete Connectivity


Model : SDS2072X (2CH)

Bandwith : 70 MHz

Sampling Rate (Max.) : 2 GSa/s

Channel : 2 + EXT ; 4 = EXT

Memory Depth (Max.) : 140 Mpts (Single-Channel), 70 Mpts (Dua Channel)

Waveform Capture Rate (Max.) : 140,000 wfm/s (normal mode), 500,000 wfm/s(sequence mode)

Trigger Type : Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video

Serial Trigger : IIC, SPI, UART/RS232, CAN LIN

Decoder Type (Optional) : IIC, SPI, UART/RS232, CAN, LIN

16 Digital Channels (MSO Option) : Maximum waveform capture rate up to 500 MSa/s, Record length up to 140 Mpts/CH

Waveform Generator (Optional) : Single Channel, Max.frequency up to 25 MHz, 125 MSa/s sampling rate, 16 Kpts wave length

I/O : USB Host, USB Device, LAN, Pass/Fail, Trigger Out

Probe (Std) : PB470 70 MHz (1 pcs for each channel)

Display : 8 Inch TFT LCD (400×480)

Have any Question or Comment?

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *