PT. SRIAYU MULTI KREASI

Jln. Hayam Wuruk No. 2-5

Gedung Harco Glodok Lantai 5 Blok A.42 - Jakarta Barat

PT. SRIAYU MULTI KREASI

Dwyer Series PMT2 Particulate Transmitter


Detail Dwyer Series PMT2 Particulate Transmitter

The SERIES PMT2 Particulate Transmitter is designed to measure particulate emission levels from dust collector discharge. Using DC coupled electrostatic induction sensing technology, the transmitter monitors a pA current that is generated as particulate passes near the probe; a 4 to 20 mA signal will vary based on the particulate level. The PMT2 offers 6 sensitivity ranges allowing the user to choose the range that will best fit the application. The range and test selector switch can also be set to output a 4 mA or 20 mA signal to assist with set up or trouble shooting. Averaging time setting can be used to dampen the signal if desired.

Model Description

  • PMT2-03-A-U2
    Particulate transmitter, 3″ probe, UL intrinsically safe rating, 3/4″ male NPT process connections, 1/2″ female NPT electrical connections
  • PMT2-05-A-U2
    Particulate transmitter, 5″ probe, UL intrinsically safe rating, 3/4″ male NPT process connections, 1/2″ female NPT electrical connections
  • PMT2-10-A-U2
    Particulate transmitter, 10″ probe, UL intrinsically safe rating, 3/4″ male NPT process connections, 1/2″ female NPT electrical connections
  • PMT2-15-A-U2
    Particulate transmitter, 15″ probe, UL intrinsically safe rating, 3/4″ male NPT process connections, 1/2″ female NPT electrical connections
  • PMT2-20-A-U2
    Particulate transmitter, 20″ probe, UL intrinsically safe rating, 3/4″ male NPT process connections, 1/2″ female NPT electrical connections
  • PMT2-30-A-U2
    Particulate transmitter, 30″ probe, UL intrinsically safe rating, 3/4″ male NPT process connections, 1/2″ female NPT electrical connections
  • PMT2-36-A-U2
    Particulate transmitter, 36″ probe, UL intrinsically safe rating, 3/4″ male NPT process connections, 1/2″ female NPT electrical connections

Features :

  • Simple 2 wire installation for PLC and control panels
  • Non-stick PTFE coated probe to prevent false readings from moist and conductive dusts, condensate, and dust buildup
  • Remote zero calibration helps to decrease maintenance time

Specification : 

  • Service : Air and compatible gases, any type of particulate conductive or non inductive
  • Wetted Materials : 316L SS, silicone, and PTFE
  • Enclosure : Powder coated aluminum
  • Accuracy : ±5% of reading
  • Particulate Size : 0.3 microns and higher
  • Detection Range : 5 to 5000 pA (6 selectable range options)
  • Temperature limits : Ambient : -40 to 145°F (-40 to 63°C); Process: -40 to 248°F (-40 to 120°C).
  • Pressure limits : 30 psi (2 bar)
  • Output signal : 4 to 20 mA
  • Power Requirements : 12 to 28 VDC
  • Electrical Connection : Two 1/2 inch female NPT conduit openings
  • Terminal Block : Removeable (16 to 20 AWG wire)
  • Enclosure : Type 4 (IP66)
  • Mounting Orientation : Any
  • Averaging Time : 1 to 360 s (10 selectable options)
  • Weight : Varies with length of probe and type of mount

Have any Question or Comment?

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

PRODUK KAMI

VISITOR