Detail Elcometer 115 Wet Film Combs Imperial – Range 1 – 13mils
Wet Film Combs | Imperial | Range: 1 – 13mils | Elcometer 115
SKU: B11529451E
Product Description
These reusable precision stainless steel combs are made to be long lasting and are supplied with either Metric or Imperial measurements.
Four separate thickness ranges are available up to a maximum of 1270µm / 50mils and are manufactured to an accuracy of 5% or 2.5µm (0.01mil), whichever is the greater.
Each comb has 10 measurement steps (teeth).
Place a comb perpendicular to and touching the substrate. Hold the comb in position and wait a few seconds until the teeth are wet. Remove the comb from the film. The wet film thickness lies between the biggest value ‘coated’ or ‘wet’ tooth and the smallest value ‘uncoated’ or ‘dry’ tooth.
Technical Specifications – Elcometer 115 Wet Film Combs (Metric Combs)
Part Number
Range
Measurement Steps
B11529455M
20 – 325µm
20, 35, 50, 75, 100, 125, 175, 225, 375, 325µm
B11529456M
50 – 450µm
50, 75, 100, 150, 200, 250, 300, 350, 400, 450µm
B11529457M
50 – 750µm
50, 100, 150, 200, 250, 350, 450, 550, 650, 750µm
B11529458M
125 – 1250µm
125, 250, 375, 500, 625, 750, 875, 1000, 1125, 1250µm
Certificate available
Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability. Accredited Certificate: can be issued for Fixed Calibration Equipment and a full UKAS traceable certificate is issued from an independent Calibration Laboratory.
Technical Specifications – Elcometer 115 Wet Film Combs (Imperial Combs)
Part Number
Range
Measurement Steps
B11529451E
1 – 13mils
1, 1.5, 2, 3, 4, 5, 7, 9, 11, 13mils
B11529452E
2 – 18mils
2, 3, 4, 6, 8, 10, 12, 14, 16, 18mils
B11529453E
2 – 30mils
2, 4, 6, 8, 10†, 10†, 15, 20, 25, 30mils
B11529454E
5 – 50mils
5, 10, 15, 20, 25, 30, 35, 40, 45, 50mils
Certificate available
Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability. Accredited Certificate: can be issued for Fixed Calibration Equipment and a full UKAS traceable certificate is issued from an independent Calibration Laboratory.
† Two 10mil values, one on each edge of the comb
