PT. SRIAYU MULTI KREASI

Jln. Hayam Wuruk No. 2-5

Gedung Harco Glodok Lantai 5 Blok A.42 - Jakarta Barat

PT. SRIAYU MULTI KREASI

Elcometer 121/4 Paint Inspection Model | (Metric & Imperial)


Detail Elcometer 121/4 Paint Inspection Model | (Metric & Imperial)

Paint Inspection Gauge | Standard Model | Dual Scale (Metric & Imperial) | Elcometer 121/4
SKU: A121—-S

Product Description

Available in two models, the Elcometer 121 Paint Inspection Gauge is designed to measure the thickness of single or multiple layers of coatings.

Both models are supplied with illuminated integrated graticule microscopes.

The Top model has an internal carousel allowing each of the three cutters to be selected easily together with a cross hatch adhesion tester.

    • Compact and convenient, ideal for use in confined areas
    • Made of anodized aluminium for durability
    • Bright LED light source for clear vision
    • Top Model can hold one cross hatch cutter & three standard cutters which are locked tight and a simple rotation of the cutter holder changes the cutting tool.
Technical Specifications – Elcometer 121/4 Standard & Top Paint Inspection Gauges
Part Number
Description
A121—SM
Elcometer 121/4 Standard Paint Inspection Gauge – Metric Only
A121—-S
Elcometer 121/4 Paint Inspection Gauge – Standard Model – Dual Scale (Metric & Imperial)
A121—-SC
Elcometer 121/4 Paint Inspection Gauge – Standard Model – Dual Scale – w/ Calibration Certificate
A121—-T
Elcometer 121/4 Paint Inspection Gauge – Top Model – Dual Scale (Metric & Imperial)
Range
2 – 2000µm (0.08 – 80mils) Accuracy is dependent on tool cut angle, half a division
Dimensions
Standard:110 x 75 x 30mm (4.3 x 3 x 1.2”), 369g (13oz)
Top:110 x 75 x 40mm (4.3 x 3 x 1.6 ), 383g (13.5oz)
Certificate available
Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability.

Accredited Certificate: can be issued for Fixed Calibration Equipment and a full UKAS traceable certificate is issued from an independent Calibration Laboratory.

Packing List

    • Elcometer 121/4
    • cutters 1 & 4 & 6
    • x50 microscope
    • 4 x AG3 batteries for lamp (fitted)
    • hexagonal wrench
    • black marker pen
    • wrist strap
    • carry case
    • operating instructions

Product Accessories
Accessories – Elcometer 121/4 Standard & Top Paint Inspection Gauges
Part Number
Description
Angle
Measurement Range
Graticule Scale Factor
T99915761-1
Tungsten Carbide Cutter No 1
45°
20 – 2000µm (1 – 80mils)
20µm (1mil)
T99915761-4
Tungsten Carbide Cutter No 4
26.6°
10 – 1000µm (0.5 – 35mils)
10µm (0.5mil)
T99915761-6
Tungsten Carbide Cutter No 6
5.7°
2 – 200µm (0.1 – 8mils)
2µm (0.1mil)
Coating Thickness
Standard
T99913700-1
X-Hatch Cutter, 6 teeth x 1mm
0 – 60µm (0 – 2.4mils)
ISO
T99913700-2
X-Hatch Cutter, 11 teeth x 1mm
0 – 50µm (0 – 2.0mils)
ASTM
T99913700-3
X-Hatch Cutter, 11 teeth x 1.5mm
0 – 60µm (0 – 2.4mils)
T99913700-4
X-Hatch Cutter, 6 teeth x 2mm
50 – 125µm (2.0 – 5.0mils)
ASTM
T99913700-5
X-Hatch Cutter, 6 teeth x 3mm
121 – 250µm (4.8 – 9.8mils)
ISO
K0001539M001
Adhesion Tape (1 roll)
K0001539M002
Adhesion Tape (1 roll)

Have any Question or Comment?

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

PRODUK KAMI

VISITOR