
Detail Elcometer 130 SSP | Factory Certificate Of Conformance
Soluble Salt Profiler | Elcometer 130 SSP | Factory Certificate of Conformance
SKU: E130-SP
“Calibration verification – peace of mind”
A Calibration Verification Tile is available for verifying the accuracy of the gauge whilst out in the field and the verification date is recorded for use in reports.
Calibration Verification Tile available for verifying the accuracy of the gauge.
Key features of the Elcometer 130 Soluble Salt Profiler include:
-
- Range of measurement modes:
-
-
- Cleanliness: two measurement options are available when measuring soluble salts – Bresle Method Equivalency or Elcometer 130 Equivalency mode
-
-
-
- Conductivity: ideal for measuring ionic contaminants, sometimes referred to as total dissolved solids –TDS, within a solution
-
-
- Multi-point conductivity sensor allows the trend in conductivity to be displayed as a density map
-
- Automatic temperature compensation ensures accurate results
-
- Large colour LCD screen displays readings in µg/cm², ppm, µS/cm, mS/cm, % salinity or mg/m²
-
- Stores up to 3,500 sets of readings in 1,000 alpha numeric batches
-
- Non-oxidising gold plated contacts ensure lifetime performance
-
- Transfer data via USB or Bluetooth® to ElcoMaster® for instant report generationProduct Features
Model SSP
- Transfer data via USB or Bluetooth® to ElcoMaster® for instant report generationProduct Features
Repeatable & reproducible measurements
Easy to use menu structure; in 30+ languages
Tough, impact, waterproof & dust resistant; equivalent to IP64
Bright colour screen; with permanent back light
Scratch & solvent resistant display; 2.4” (6cm) TFT
2 year gauge warranty*
USB power supply; via PC
Calibration certificate
Calibration verification mode (with optional certified calibration tile)
Ambient light sensor; with adjustable auto brightness
Emergency light mode
Magnetic & tripod mounting points
Data output, USB to PC & Bluetooth to PC, Android™ & iOSǂ devices
On screen statistics
Number of readings (n); Mean/ Average, (x);
Standard deviation (σ);
Highest reading/ Peak Salt Concentration (Hi;)
Lowest reading (Lo); Coefficient of variation (CV%);
Number of readings above high limit
Gauge memory
Number of individual reading sets;
including salt density, pass/fail map & distribution graph
3,500
Number of batche
1,000
Measurement units & range
Surface Cleanliness – Elcometer 130 Mode
0-50µg/cm² (0-500mg/m²)
Surface Cleanliness – Bresle Equivalent Method Mode
0-15µg/cm² (0-150mg/m²)
Conductivity
0-6000µS/cm (0-6mS/cm)
0-3000ppm (0-0.3% Salinity)
Resolution
Surface Cleanliness
0.1μg/cm² (1mg/m²)
Conductivity
1µS/cm (0.001mS/cm)
1ppm (0.0001% Salinity)
Gauge Accuracy
-
±1% of reading
Measurement mode
Surface Cleanliness
Conductivity
Calibration offset mode
Automatic temperature compensation
ElcoMaster® software & USB cable
Individual reading and profile map stored with time and date
Plastic transit case
Alpha-numeric batch names; user definable on the gauge
Fixed batch size mode; with batch linkin
Delete last reading
Limits; (gauge & batch specific)
Review, copy, clear & delete batches & calibration settin
Trend graph; last 20 readings
Batch review graph
Analogue bar graph
Technical Specification
Model
Description
Certificate
E130-SP
Elcometer 130 Soluble Salt Profiler
E130-SPC
Elcometer 130 Certified Soluble Salt Profiler
Operating Range
5°C – 50°C (41°F – 122°F)
Power Supply
4 x AA batteries or via USB
(rechargeable batteries can also be used)
Battery Life
Alkaline: Approximately 30 hours
Lithium: Approximately 45 hours
Sample Time
2 minutes
Sampling Size
110mm (4.3″) circle
Dimensions
250 x 145 x 50mm (9.8 x 5.7 x 1.9″)
Weight
780g (1.72lb)
Packing List
Elcometer 130 Soluble Salt Profiler, 3 x magnetic discs, 100 x high purity test papers,
250ml (8.5fl oz) pure water, 20 x PVC storage bags, disposable gloves, sensor wipes,
3 x 3.0ml (0.1fl oz) syringes, 2 x plastic tweezers, 4 x AA batteries, shoulder strap,
plastic transit case, test certificate and operating instructions, USB cable, ElcoMaster® software