Detail Elcometer 134A Chloride Ion Test Kit For Abrasives
Chloride Ion Test Kit for Abrasives | Elcometer 134A
Chlorides deposited on a surface by contaminated abrasives during blasting can cause a coating to fail prematurely.
Contamination can build up, particularly if the blast media is recycled several times. Using the Elcometer 134A Chloride Ion Test for abrasives in the field will accurately identify contamination and prevent costly surface-related failures.
Results are recorded in parts per million (ppm) requiring no complicated calculations. Elcometer 134A test is designed to use a ratio of 1:1 for easy conversation to µg/cm².
Technical Specifications – Elcometer 134A Chloride Ion Test Kit for Abrasives
Elcometer 134A Chloride Ion Test Kit for Abrasives
1 – 60µg/cm² (1 – 60ppm)
1.5 minutes (approx)
Tests per kit
Not exceeding 25°C (77°F)
185 x 125 x 110mm (7 x 5 x 4.5”)
- 4 x test kits
- abrasive sample container
- mixing container with a pre-measured quantity of solution
- titration tube snapper
- operating instructions