The 1510 Bend Tester is a premium quality, precision milled solid stainless steel conical mandrel determines elasticity, adhesion and elongation of paint on sheet metal. Specimen is bent along mandrel, and the results (cracks) correspond to different test diameters as indicated on the dual (metric/imperial) indicator. Differs from other commercially available devices whose mandrels consist of painted cast metal.
The frame has a bending lever with a roller which pivots on a steel conical mandrel with a diameter from 3.2 – 38.1mm (0.12 – 1.5″). A graduation indicates the mandrel diameter in both mm and inches.
Technical Specifications – Elcometer 1510 Conical Mandrel Bend Tester
Elcometer 1510 Conical Mandrel Bend Tester
3.2 – 38.1mm (0.1 x 1.5″)
180 x 100 x 0.8mm (7 x 4 x 0.03″)
325 x 350 x100mm (12.8 x 13.8 x 4″)
Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability. Accredited Certificate: can be issued for Fixed Calibration Equipment and a full UKAS traceable certificate is issued from an independent Calibration Laboratory.
- Elcometer 1510 Conical Mandrel Bend Tester
- operation instructions