
Product Description
Important note – This Elcometer Impact Tester Kit is designed to work with the Elcometer 1615 Impact Tester Universal Base Unit and Tube.
Packing List:
- Falling 1kg (2.2lb) weight with a 20mm (0.7″) punch
- Stop collar
- 27mm (1.06″) die with fixing screw
- Sample clamp with two fixing screws
- 3mm (0.12″) and 4mm (0.15″) hexagonal wrench
- Static indenter with 15.9mm (0.6″) punch
- Falling 1kg (2.2lb) weight
- 12.7mm (0.5″) punch
- 16.3mm (0.64″) die with fixing screw
Technical Specifications – Elcometer 1615 Variable Impact Tester Kits
Part Number
Description
K0001615KITA
Elcometer 1615 Kit A to meet ISO 6272:1993 Standard
K0001615KITB
Elcometer 1615 Kit B to meet ISO 6272 Part 2:2002 Standard
K0001615KITC
Elcometer 1615 Kit C to meet ASTM D2794 Method 2, BS6486:1984, EN 12206-1 Standards
K0001615KITD
Elcometer 1615 Kit D to meet ISO 6272 Part 1:2002, BS EN ISO 6272-1:2004 Standards
K0001615KITE
Elcometer 1615 Kit E to meet NF T30-017:1989 Standard
K0001615KITF
Elcometer 1615 Kit F to meet ISO 6272:1993, ISO 6272-2:2002 Standards
K0001615KITG
Elcometer 1615 Kit G to meet BS EN ISO 6272-2:2011 Standard
Packing List
Kit A: Sample clamp, 27mm (1.06″) die, 1kg (2.2lb) falling weight with a 20mm (0.79″) punch, stop collar, 2 x hexagonal wrench and operating instructions
Kit B: Indenter with 15.9mm (0.6″) punch, die 16.3mm (0.64″), falling 1kg (2.2lb) weight, hexagonal wrench and operating instructions
Kit C: Indenter with 15.9mm (0.6″) punch, 2lb (0.91kg) falling weight and operating instructions
Kit D: 1kg (2.2lb) falling weight with 20mm (0.79″) punch, 27mm (1.06″) die, stop collar, hexagonal wrench and operating instructions
Kit E: 400g (0.88lb) falling weight with a 23mm (0.9″) punch, 22mm (0.87″) die, sample clamp, hexagonal wrench and operating instructions
Kit F: Sample clamp, stop collar, 27mm (1.06″) die, 1kg falling indenter with a 20mm (0.79″) punch, indenter with 15.9mm (0.6″) punch, 12.7mm (0.5″) punch, 16.3mm (0.6″) die, falling 1kg weight, 2 x hexagonal wrench and operating instructions
Kit G: Falling 1kg (2.2lb) weight with a 15.9mm (0.62″) static indenter with handle and punch; 12.7mm (0.5″) static indenter with handle and punch; 16.3mm (0.64″) die with fixing screw; guide bracket with two fixing screws; 3mm (0.12″) hexagonal wrench; 4mm (0.16″) hexagonal wrench
Certificate available
Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability. Accredited Certificate: can be issued for Fixed Calibration Equipment and a full UKAS traceable certificate is issued from an independent Calibration Laboratory.