
Detail Elcometer 270/3 Pinhole Detector
Pinhole Detector | Elcometer 270/3
SKU: D270—-3
Product Description
The Elcometer 270 range utilizes the wet sponge technique and has been designed to set a new standard for wet sponge pinhole detectors – a high quality, low voltage detector with similar accessories to a high voltage spark tester.
Voltage: 9V & 90V
-
- Supplied ready to use
-
- Automatic sensitivity calibration and voltage checks
-
- Low battery indicator
-
- Visual and audible alarms
-
- Integral and separate wand functionality
-
- A wide range of fully interchangeable wand accessories
-
- Easy release snag proof cables
-
- Large standard sponge
-
- An inspection kit for all your requirements is available
A wide range of Pinhole Inspection Kits are available.
Model
Elcometer 270/3 Pinhole Detector
Elcometer 270/4 Pinhole Detector
Part Number
D270—-3
D270—-4
Voltage
9V and 90V
9V, 67.5V and 90V
Maximum Measurement Range
500µm (20mils)
500µm (20mils)
Sensitivity
9V: 90kΩ ±5%
90V: 400kΩ ±5%
9V: 90kΩ ±5%
67.5V: 125kΩ ±5%
90V: 400kΩ ±5%
Battery Life (continuous use)
9V: up to 200 hours
90V: up to 80 hours
9V: up to 200 hours
67.5V: up to 100 hours
90V: up to 80 hours
Battery Type
3 x AA (LR1600) 1.5V alkaline
(NiMH rechargeable batteries can also be used, battery life will be reduced by up to 75%)
Accuracy of Setting
±5%
Dimensions
Without Wand – 210 x 42 x 37mm (8.3 x 1.7 x 1.5″)
Standard Wand – 175mm (6.9″) long (including sponge)
Flat Sponge 175mm – (6.9″) long (including sponge)
Weight
610g (21oz) including wand, cable and batteries
Certificate available
Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability
Packing List
Pinhole Detector, standard wand and flat sponge, 4m (13 2″) return lead with crocodile clip, 3 x LR1600 (AA) batteries and operating instructions