Detail Elcometer 3230 Wet Film Wheels – Range: 0 – 100 µm – Metric
Wet Film Wheels – Range: 0 – 100µm | Metric | Elcometer 3230
The Elcometer 3230 Wet Film Wheel is a high precision, accurate and easy to use instrument which consists of a set of three wheels. The central wheel is of a smaller diameter and is eccentric relative to the two outer wheels.
By rolling the gauge through a wet coating, the center wheel eventually touches the film. This point on the scale indicates the thickness.
A convenient mounting handle for the wheel is available in two lengths; 15cm (6″) & 50cm (19″); please order separately.
When the volume to solids ratio of the coating is known (generally found on the product data sheet supplied by the manufacturer), the wet film thickness can be used to predict the dry film thickness.
Several measurement ranges between 0 to 25µm and 0 to 3000µm (0 to 1mil and 0 to 40mils) are available.
- Continuous scale produces ±5% measurement accuracy
- Suitable for flat and curved surfaces
Using a wet film wheel:
Roll the wheel through a wet coating, the center wheel eventually touches the film. This point on the scale indicates the thickness.
When the volume to solids ratio of the coating is known, generally found on a product data sheet, the wet film thickness can be used to predict the dry film thickness.
Technical Specifications – Elcometer 3230 Wet Film Wheels (Metric)
0 – 25µm
0 – 40µm
0 – 50µm
0 – 100µm
0 – 150µm
0 – 200µm
0 – 250µm
0 – 300µm
0 – 400µm
0 – 500µm
0 – 1000µm
0 – 1500µm
0 – 2000µm
0 – 3000µm
50 x 30mm (1.97 x 1.18″)
Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability. Accredited Certificate: can be issued for Fixed Calibration Equipment and a full UKAS traceable certificate is issued from an independent Calibration Laboratory.
- Wet Film Wheel
- storage case
- operating instructions