
Detail Elcometer 456 Old 456 Models Only Scale 1
Old 456 Models Only | Straight Non-Ferrous Probe | Scale 1 | Elcometer 456
SKU: T456N1S
Note: Compatible with older 456 models only (2012 and older). Not for use with new 456 separate models.
This straight probe is specifically designed to measure the coating on both flat and curved surfaces.
All Elcometer probes are supplied with a Test Certificate and a set of calibration foils appropriate to the scale range of the probe.
Technical Specifications – Probe Range (Scale 1) | Old Elcometer 456 Only
Range
0-60 mils (0-1500µm)
Accuracy*
±1-3% or ±0.1 mil (±2.5µm)
Resolution
0.01 mil: 0-5 mils; 0.1mil: 5-60 mils
(0.1µm: 0-100µm; 1µm: 100-1500µm)
Minimum convex
surface radius
35mm (1.38″)
Minimum concave
surface radius
25mm (0.98″)
Minimum headroom
85mm (3.35″)
Minimum sample diameter
6mm (0.24″)
*Whichever is greater