Detail Elcometer 456 Old 456 Models Only | Straight Ferrous Probe | Scale 1
Old 456 Models Only | Straight Ferrous Probe | Scale 1 | Elcometer 456
Note: Compatible with older 456 models only (2012 and older). Not for use with new 456 separate models.
This straight probe is specifically designed to measure the coating on both flat and curved surfaces.
All Elcometer probes are supplied with a Test Certificate and a set of calibration foils appropriate to the scale range of the probe.
Technical Specifications – Probe Range (Scale 1) | Old Elcometer 456 Only
0-60 mils (0-1500µm)
±1-3% or ±0.1 mil (±2.5µm)
0.01 mil: 0-5 mils; 0.1mil: 5-60 mils
(0.1µm: 0-100µm; 1µm: 100-1500µm)
Minimum sample diameter
*Whichever is greater