
Detail Elcometer 510 Automatic Pull-Off Adhesion Tester 50mm Model T
Automatic Pull-Off Adhesion Tester | 50mm Concrete Kit | Model T | Elcometer 510
SKU: F510-50T
Product Description
The Elcometer 510 Automatic Pull-Off Adhesion Tester accurately measures the strength of the bond between the coating and the substrate.
-
- Automatic hydraulic pump ensures smooth and continuous pressure application for consistent, repeatable results
-
- Fully adjustable pull rates 14.5-203psi (0.1-1.4MPa/s) to meet National and International Standards
-
- Can be used with 10, 14.2, 20 and 50mm diameter dollies
-
- User definable limits with unique pressure hold and release function
-
- User definable measurement range with an accuracy of ±1% of full scale:
-
- 10mm dolly: 14400psi (100MPa)
-
- 14.2mm dolly: 7200psi (50MPa)
-
- 20mm dolly: 3600psi (25 MPa)
-
- 50mm dolly: 580psi (4MPa)
-
- User definable measurement range with an accuracy of ±1% of full scale:
-
- Dust and water resistant rugged design to IP64
-
- Interchangeable units: MPa, psi, Nmm2 and N
-
- A range of standard and thin substrate actuator skirts (compatible with Elcometer 506) available for testing coatings on thick, thin, flat or convex substrates
-
- Store up to 60,000 readings with individual pull graphs in up to 2,500 alpha numerical batches, complete with attribute failure information
-
- USB and Bluetooth® data output – Compatible with ElcoMaster™ App for iPhone, iPod, iPad and Android mobile devices
Product Features
Model S
Model T
Repeatable & reproducible measurements
Easy to use menu structure; multiple languages
Tough, impact, waterproof & dust resistant; equivalent to IP64
Bright LCD colour screen; with ambient light sensor
Scratch & solvent resistant display; 2.4” (6cm) TFT
Calibration certificate
2 year gauge warra
Automatic rotating display; 0°, 180°
Data output via USB (Live readings – and batch)
Data output via Bluetooth®
PC command; start & stop gauge from a PC with live readings (USB only)
Switchable Units (mPa, psi, N, Nmm-2)
On-Screen Statistics (η, x, σ, hi, lo, COV, N>hi limi
Trend Graph
Pull Rate Graph (Load v Time)
Interchangeable Dolly Selection; 10, 14.2, 20 & 50mm
User Selectable Pull Rates; (Model S & Model T Standard Mode)+
10mm: 1.00, 2.00, 3.00, 4.00, 5.00 MPa/s
14.2mm: 0.4, 0.7, 1.4, 2.0, 2.5 MPa/s
20mm: 0.2, 0.3, 0.7,1.0, 1.2 MPa/s
50mm: 0.04, 0.08, 0.12, 0.16, 0.20 MPa/s
125, 200, 400, 600, 725psi/s
60, 100, 200, 300, 360psi/s
30, 50, 100, 150, 180psi/s
5, 8, 16, 24, 30psi/s
User Selectable Pull Rates; (Model T Advanced Mode)+
10mm: 0.4 – 5.60 MPa/s
14.2mm: 0.2 – 2.80 MPa/s
20mm: 0.1 – 1.40 MPa/s
50mm: 0.02 – 0.22 MPa/s
58 – 812psi/s
29 – 403psi/s
15 – 203psi/s
2 – 32psi/s
in 0.1MPa / 1psi steps
in 0.1MPa / 1psi steps
in 0.1MPa / 1psi steps
in 0.01MPa / 0.1psi steps
User Selectable Limit & Limit Hold Time
Gauge Memory; maximum number of readings
60
60,000*
Number of Batches (Alpha Numeric – Model T)
1
2,500
Attribute Modes to meet National & International Standards
Display Modes
Readings, Selected Stats & Run Chart (last 20 readings)
Pull Rate Graphs
Batch Review
Power; Battery (B), AC Mains Power (M)
B
B, M
USB Cable & ElcoMaster™ 2.0 CD
Power Cable with Multi International Plug Adaptor (UK, EU, US, AUS)
Plastic Transit Case
Date & Time
In Field Adhesion Calibration Verification Mode
♦Model T only
* When ‘Rate Graph’ is enabled, the number of readings which can be stored is reduced depending on the graph resolution selected
+ Please refer to the User Guide for further information on all units