Jln. Hayam Wuruk No. 2-5

Gedung Harco Glodok Lantai 5 Blok A.42 - Jakarta Barat


Elcometer 550 Non-Contact Powder Laser Targeting System

Detail Elcometer 550 Non-Contact Powder Laser Targeting System

Non-Contact Powder Thickness Gauge with Laser Targeting System | Elcometer 550
SKU: A550—-4L

Product Description

Similar to the Elcometer 550 Non-Contact Powder Thickness Gauge, this gauge includes a laser guide to help detect and keep consistent measuring distances. As a result, the number of readings and the speed at which they are completed are significantly increased.

By carefully controlling the thickness of powder applied to a product, you can minimize your powder usage and ensure the quality of your coating. As contact measurement solutions damage the finish and do not predict the cured coating thickness, measuring the powder thickness pre-cure requires a non-contact solution.

Using third generation proven airborne ultrasonic technology, the new Elcometer 550 accurately predicts cured coating thickness by non-contact measurement of coating powders.

    • Accurately predicts the cured coating thickness within ± 5% of the reading or ±0.25mils (±5µm)
    • Ergonomic gun designed for comfort when taking multiple readings
    • Hand held sensor allows easy positioning of the gun for fast measurement
    • Large illuminated colour display with positioning graph to guide orientation of sensor probe
    • Tough aluminium case, ideal for testing in an industrial environment

Easy to Use

    • Easy to read, large colour display
    • Adjustable screen brightness for all test conditions
    • Ergonomic probe – ideal for continuous testing
    • Can be used straight out of the box with minimal set up time
    • On-screen guidance graph and handle LEDs help you orientate the probe sensor for fast, accurate measurements.


    • Fast, accurate and repeatable results
    • Can be used in accordance with ASTM D7378-Procedure C
    • Proven, 3rd Generation, airborne ultrasonic technology
    • User-programmable setup to account for varying powder shrinkage rates

Enhanced Technology

    • Measure thicknesses from 1.18 – 4.4mils (30 – 110µm)
    • 0.04 sq in (1mm²) measurement area – ideal for flat, curved and small surfaces
    • Test coatings on a wide range of substrates, including metal, wood, MDF, plastic and pre-coated surfaces
      Technical Specifications – Elcometer 550 Non-Contact Powder Thickness Gauge
      Part Number
      Elcometer 550 Non-Contact Powder Thickness Gauge
      3½ inches (90mm) QVGA Colour LCD
      Power Supply
      Rechargeable NiMh battery, up to 7 hours continuous use
      Measurement Range
      1.18 – 4.4mils (30 – 110µm)
      0.04mils (1µm)
      Measurement Accuracy
      ±0.25mils (±5µm) or ±5% of the coating thickness, whichever is greater
      Measurement Offset Distance
      0.71″ (18mm) from the coated substrate
      Measurement Area
      0.04sq in (1mm²)
      Operating Temperature Range
      50°F to 95°F (10°C to 35°C)
      µm / mils switch-able
      4.6 x 7.4 x 1.4″ (115 x 185 x 35mm)
      1.9lbs (900g)
      Packing List
    • Elcometer 550 Gauge with rechargeable battery
    • universal charger unit and cable
    • sensor gun and lead
    • shoulder harness
    • reference block
    • USB-PC
    • transfer cable
    • carry case
    • test certificate
    • operating instructions



Have any Question or Comment?

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *