Detail Elcometer AVU Adhesion Verification Unit
Adhesion Verification Unit | Elcometer AVU
The Elcometer AVU has been designed to provide users with the means to confirm the accuracy of their pull-off adhesion gauge.
Due to its robust design the Elcometer AVU is suitable for use on site or in the laboratory and allows users to verify or self-certify their pull-off adhesion gauges.
A range of dolly adaptors are available for testing the Elcometer 106, Elcometer 506 and Elcometer 510 adhesion gauges. Adaptors are also available for testing other manufacturers’ gauges.
Attach the appropriate dolly adaptor to the AVU, connect your adhesion gauge, apply load and compare the adhesion tester value to the reading on the AVU Display.
- Max hold and live reading display
- MPa / psi switch-able units
- Backlit display
- Automatic switch off
The Elcometer AVU is supplied with either a test certificate or full calibration certificate, suitable for self-certification.
For more information on Adhesion Testers, please click here.
Technical Specifications – Adhesion Verification Unit (AVU)
Elcometer AVU Adhesion Verification Unit
Elcometer AVU Adhesion Verification Unit – Certified
2 x 1.5V AA Cells (Alkaline)
165 x 155 x 105mm (6.5 x 6.1 x 4.1”)
Elcometer AVU, Elcometer 506/510 20mm (0.76”) dolly adaptor, test or calibration certificate (as appropriate), 2 x AA batteries, carry case and operating instructions