Jln. Hayam Wuruk No. 2-5

Gedung Harco Glodok Lantai 5 Blok A.42 - Jakarta Barat


Elcometer Qualicoat Powder Coating Inspection Kit

Detail Elcometer Qualicoat Powder Coating Inspection Kit

Elcometer Qualicoat Powder Coating Inspection Kit

The Qualicoat Organisation brings together the ideals of several national coating associations into one quality label for the powder coating applied to aluminium architectural applications. The aim of Qualicoat is to establish the minimum standard that plant installations, coating materials and finished products which have been powder coated must meet.

Within this quality label, Qualicoat identifies a range of inspection requirements to be undertaken with regards to the quality control of powder coated products.

The Elcometer Qualicoat Powder Coating Inspection Kit provides the various test instrumentation required to meet the high standards of this organization.
Qualicoat Kit

Elcometer 480
Basic Glossmeter: 60°

Elcometer 3095
Buchholz Hardness Tester

Elcometer 1506
Mandrel Bend Tester with 5mm and 8mm (0.20 and 0.31”) Mandrels

Elcometer 1615
Base Unit and Tube Assembly and Kit B: ISO 6272/2 and BS 6496

Elcometer 1620
Manual Cupping Tester – Dial Gauge, mm/mils

Elcometer 1542
Cross Cut Kit (Includes 3 Cross Hatch Cutters)

Elcometer 1539
99 Adhesive ASTM D3359 Tape

Elcometer 215
Oven Data Logger Top Kit(215 Standard in Basic Kit)

Elcometer 415
FNF Integral Digital Coating Thickness Gauge for smooth surfaces (Basic Kit Only)

Elcometer 456
Model T Dual FNF Separate Digital Coating Thickness Gauge(Top Kit Only)

Elcometer 456
FNF Scale 1 Standard Probe; 0-1500µm / 0-60mils(Top Kit Only)

A wide range of K-type temperature probes is also available. These are not supplied with the kit and must be ordered separately.

Have any Question or Comment?

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *