Jln. Hayam Wuruk No. 2-5

Gedung Harco Glodok Lantai 5 Blok A.42 - Jakarta Barat


Elcometer VG10 Velocity Gauge

Product Description

The VG10 is a simple hand-held velocity gauge.

Ideal for determining the speed of sound (velocity) of an unknown material or as a device to assess the homogeneity of a component of known thickness.

By simply placing the transducer probe on the material the velocity gauge will display the speed of sound of that material at that point.

The high speed scan mode allows the operator to drag the probe across the material and when the probe is lifted from the material, the velocity gauge displays the fastest velocity recorded during the scan.


    • Durable gauge and probe construction
    • Tough, impact, water, dust & petroleum product resistant
    • Up to 200 hours battery life
    • Multi-function 4.5 digit LCD display, backlit for use in poor light conditions
    • Backlight is selectable on/off/auto (illuminates only when taking a measurement)
    • Measurements in metres/second and inches/microsecond
    • Scan bar display indicates stability of reading

Model & Part Number
VG10 Ultrasonic Velocity Gauge
Material thickness digits display
Measurement Mode PE
Measurement Rate
Manual : Scan Mode 4 readings per second 16 readings per second
Measurement Range 0.63 – 500mm (0.025 – 19.999 inches)
Measurement Accuracy ±0.01mm (±0.001 inch)
Measurement Resolution 0.01mm (0.001 inch)
Velocity Calibration Range 1250 – 10,000m/s 0.0492 – 0.3937in/μs

Additional Features:
High speed scan mode
Transducer Probe Type
dual element

Transducer Frequency Range 1 – 10MHz
V-path / dual path error correction automatic
Probe Zero
Manual (via integrated probe disk)
Display 12.7mm (0.5 inch) high digits
Units (selectable) metres/second or inches/microsecond
LED Backlight on / off / auto
Repeatability / Stability Indicator

Battery Type 2 x AA alkaline
Battery Life (approximate) 200 hours
Low Battery Indicator
Battery Save Mode auto
Operating Temperature -30 to 50°C (-20 to 120°F)
Size (w x h x d)
63.5 x 114.3 x 31.5mm
2.5 x 4.5 x 1.24 inches
Weight (including batteries)
284g (10oz)
Aluminium case design with gasket sealed end caps, waterproof membrane keypad
Transducer Connector Type
LEMO RS232 Interface
for programming only
Packing List
Elcometer NDT VG10 gauge, couplant, carry case, user manual,
test certificate, 2 x AA batteries

Have any Question or Comment?

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *