
Product Description
GW Instek is launching AFG-2225, its first basic level dual-channel arbitrary function generator, which provides superior features in its class. Both channels are equipped with same characteristics to fit dual-signal applications such as differential or IQ signaling. The outstanding cost-performance value makes the AFG-2225 a practical instrument to accelerate the development process.
The major features for both channels include 10Vpp output amplitude; 25MHz frequency bandwidth with 1uHz resolution; built-in waveforms of Sine, Square, Ramp (Triangle) and Noise. As to the 1%~99% adjustable duty cycle of Square waveform can be used as pulse signal sources. For the arbitrary waveform, user can edit the 66 built-in waveforms or create a whole new one. Moreover, AFG-2225 carries features of AM/FM/PM/FSK/SUM Modulation, Sweep, Burst and Frequency Counter, which can be applied to various communication fields.
In addition to the intuitive and friendly user interface, the 3.5-inch color LCD displays the comprehensive operation information including the true waveform presented at the output. USB Host and Device interfaces are equipped to link the AFG-2225 with other devices, which provide the flexibility of waveform generation for more practical usages. With link to GW Instek GDS-series Digital Storage Oscilloscopes (DSOs), the waveforms of interest can be captured and reconstructed. User can also use the arbitrary waveform PC software to edit the waveform and then send to AFG-2225 directly, or save the waveform into flash drive and then transfer to AFG-2225.
Specification
AFG-2225 models CH1 CH2 Waveforms Sine, Square, Ramp, Pulse, Noise, ARB Arbitrary Functions Sample Rate 120 MSa/s Repetition Rate 60 MHz Waveform Length 4k points Amplitude Resolution 10 bits Non-Volatile Memory 4k points Frequency Characteristics Range Sine, Square 1uHz~25MHz Ramp 1MHz Resolution 1uHz Accuracy Stability ±20 ppm Aging ±1 ppm, per 1 year Tolerance ≤1 mHz Output Characteristics Amplitude Range 1mVpp to 10 Vpp (into 50Ω)
2mVpp to 20 Vpp (open-circuit)
1mVpp to 5 Vpp (into 50Ω) for 20MHz-25MHz
2mVpp to 10 Vpp (open-circuit) for 20MHz-25MHz Accuracy ±2% of setting ±1 mVpp (at 1 kHz) Resolution 1mV or 3 digits Flatness ±1% (0.1dB) ≤100kHz
±3% (0.3 dB) ≤5MHz
±5% (0.4 dB) ≤12MHz
±10%(0.9dB) ≤25MHz
(sine wave relative to 1kHz) Units Vpp, Vrms, dBm Offset Range ±5 Vpk ac +dc (into 50Ω)
±10Vpk ac +dc (Open circuit)
±2.5 Vpk ac +dc (into 50Ω) for 20MHz-25MHz
±5Vpk ac +dc (Open circuit) for 20MHz-25MHz Accuracy 2% of setting + 10mV+ 0.5% of amplitude Waveform Output Impedance 50Ω typical (fixed)
> 10MΩ (output disabled) Protection Short-circuit protected
Overload relay automatically disables main output Sine wave Characteristics Harmonic distortion ≤-55 dBc DC ~ 200kHz, Ampl > 0.1Vpp
≤-50 dBc 200kHz ~ 1MHz, Ampl > 0.1Vpp
≤-35 dBc 1MHz ~ 5MHz, Ampl > 0.1Vpp
≤-30 dBc 5MHz ~ 25MHz, Ampl > 0.1Vpp Square wave Characteristics Rise/Fall Time ≤25ns at maximum output. (into 50 Ω load) Overshoot 5% Asymmetry 1% of period +5 ns Variable Duty Cycle 1.0% to 99.0% ≤100kHz
10% to 90% ≤ 1MHz
50% ≤ 25MHz Ramp Characteristics Linearity < 0.1% of peak output Variable Symmetry 0% to 100% (0.1% Resolution) Pulse Characteristics Period 40ns~2000s Pulse Width 20ns~1999.9s Overshoot <5% Jitter 20ppm +10ns AM Modulation Carrier Waveforms Sine, Square, Ramp, Pulse,Arb Sine, Square, Ramp, Pulse,Arb Modulating Waveforms Sine, Square, Triangle,
Upramp, Dnramp Sine, Square, Triangle,
Upramp, Dnramp Modulating Frequency 2mHz to 20kHz (Int)
DC to 20kHz (Ext) 2mHz to 20kHz (Int)
DC to 20kHz (Ext) Depth 0% to 120.0% 0% to 120.0% Source Internal / External Internal / External FM Modulation Carrier Waveforms Sine, Square, Ramp, Sine, Square, Ramp, Modulating Waveforms Sine, Square, Triangle,
Upramp, Dnramp Sine, Square, Triangle,
Upramp, Dnramp Modulating Frequency 2mHz to 20kHz (Int)
DC to 20kHz (Ext) 2mHz to 20kHz (Int)
DC to 20kHz (Ext) Peak Deviation DC to Max Frequency DC to Max Frequency Source Internal / External Internal / External Sweep Waveforms Sine, Square, Ramp, Sine, Square, Ramp, Type Linear or Logarithmic Linear or Logarithmic Start/Stop Freq 1uHz to Max Frequency 1uHz to Max Frequency Sweep Time 1ms to 500s 1ms to 500s Source Internal / External/Manual Internal / External/Manual FSK Carrier Waveforms Sine, Square, Ramp, Pulse Sine, Square, Ramp, Pulse Modulating Waveforms 50% duty cycle square 50% duty cycle square Modulation Rate 2mHz to 100 kHz (INT)
DC to 100 kHz(EXT) 2mHz to 100 kHz (INT)
DC to 100 kHz(EXT) Frequency Range 1uHz to Max Frequency 1uHz to Max Frequency Source Internal / External Internal / External PM Carrier Waveforms Sine, Square, Ramp Sine, Square, Ramp Modulating Waveforms Sine, Square, Triangle,
Upramp, Dnramp Sine, Square, Triangle,
Upramp, Dnramp Modulation Frequency 2mHz to 20kHz (Int)
DC to 20kHz (Ext) 2mHz to 20kHz (Int)
DC to 20kHz (Ext) Phase deviation 0˚ to 360˚ 0˚ to 360˚ Source Internal / External Internal / External SUM Carrier Waveforms Sine, Square, Ramp, Pulse, Noise Sine, Square, Ramp, Pulse, Noise Modulating Waveforms Sine, Square, Triangle,
Upramp,Dnramp Sine, Square, Triangle,
Upramp,Dnramp Modulation Frequency 2mHz to 20kHz (Int)
DC to 20kHz (Ext) 2mHz to 20kHz (Int)
DC to 20kHz (Ext) SUM Depth 0% to 100.0% 0% to 100.0% Source Internal / External Internal / External External Trigger Input Type For FSK, Burst, Sweep Input Level TTL Compatibility Slope Rising or Falling(Selectable) Pulse Width >100ns Input Impedance 10kΩ,DC coupled External Modulation Input Type For AM, FM, PM, SUM Voltage Range ±5V full scale Input Impedance 10kΩ Frequency DC to 20kHz Trigger Output Type For Burst, Sweep, Arb Level TTL Compatible into 50Ω Pulse Width >450ns Maximum Rate 1MHz Fan-out ≥4 TTL Load Impedance 50Ω Typical Dual Channel Function Phase -180˚ ~180˚ -180˚ ~ 180˚ Synchronize phase Synchronize phase Track CH2=CH1 CH1=CH2 Coupling Frequency(Ratio or Difference) Frequency(Ratio or Difference) Amplitude & DC Offset Amplitude & DC Offset DSOlink √ √ Burst Waveforms Sine, Square, Ramp Sine, Square, Ramp Frequency 1uHz~25MHz 1uHz~25MHz Burst Count 1 to 65535 cycles or Infinite 1 to 65535 cycles or Infinite Start/Stop Phase -360 to +360 -360 to +360 Internal Period 1ms to 500s 1ms to 500s Gate Source External Trigger External Trigger Trigger Source Single, External or Internal Rate Single, External or Internal Rate Trigger Delay N-Cycle, Infinite 0s to 655350ns 0s to 655350ns Frequency Counter Range 5Hz to 150MHz Accuracy Time Base accuracy±1count Time Base ±20ppm (23˚C ±5˚C) after 30 minutes warm up Resolution The maximum resolution is:
100nHz for 1Hz, 0.1Hz for 100MHz. Input Impedance 1kΩ/1pf Sensitivity 35mVrms ~ 30Vms (5Hz to 150MHz) Save/Recall 10 Groups of Setting Memories Interface USB (Host & Device) Display 3.5”TFT LCD General Specifications Power Source AC100~240V, 50~60Hz Power Consumption 25 W (Max) Operating Environment Temperature to satisfy the specification : 18 ~ 28˚C
Operating temperature :
0 ~ 40˚C
Relative Humidity:
< 80%, 0 ~ 40˚C
Installation category: CAT II Operating Altitude 2000 Meters Storage Temperature -10~70˚C, Humidity: ≤70% Dimensions (WxHxD) 266(W) x 107(H) x 293(D) mm Weight Approx. 2.5kg Accessories GTL-101× 2
Quick Start Guide ×1
CD (user manual + software) ×1
Power cord×1