Product Description

Featuring high performance, uncompromised design, and remote monitoring software, the GSP-830 3GHz Spectrum Analyzer is the latest evolution from GWInstek. The GSP-830 is one of the most advanced Spectrum Analyzer GWInstek has produced to date. The GSP-830 has an exceptional noise floor of -152dBm/Hz; combined with the optional GAP-802 preamplifier, the noise floor can reach a remarkable -172dBm/Hz. With a low noise floor, the GSP-830 is more than capable of finding limits; Trace Detection, combined with an easy-to-use interface, makes the GSP-830 an ideal solution for spectrum analysis. Using the Auto Sequence mode, advanced users can define their own macros in 10 Sequence sets. Repeat or Single run mode can be used to streamline repetitive tasks. PC connection is effortless and versatile supporting USB host/device, RS232C, VGA and GPIB (optional) for remote monitoring, control and analysis.

Specification

FREQUENCY Frequency Range 9kHz ~ 3GHz Aging Rate ± 10ppm, 0~50°C, 5ppm/yr Span Range 2kHz ~ 3GHz in 1-2-5 sequence, full span, zero span Phase Noise -80dBc/Hz @1GHz 20kHz offset typical Sweep Time Range 50ms ~ 25.6s RESOLUTION BANDWIDTH RBW Range 3kHz, 30kHz, 300kHz, 4MHz RBW Accuracy 15% Video Bandwidth Range 10Hz ~ 1MHz in 1-3 steps AMPLITUDE Measurement Range -103dBm ~ +20dBm: 1MHz ~ 15MHz, Ref.Level @ -30dBm 
-117dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ≧-110dBm 
-114dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ≧-110dBm 
(Span = 50kHz, RBW = 3kHz) Overload Protection Max. +30dBm, ±25VDC Reference Level Range -110dBm ~ +20dBm Accuracy ±1dB @100MHz Frequency Flatness ±1dB Display Range Linearity ±1dB over 70dB DYNAMIC RANGE Average Noise Floor <-135±1dBm/Hz: 1MHz ~ 15MHz, Ref.Level @ -30dBm 
<-149dBm/Hz, typical -152dBm/Hz: 15MHz ~ 1GHz, Ref.Level ≧-110dBm 
<-146dBm/Hz, typical -149dBm/Hz: 1GHz ~ 3GHz, Ref.Level ≧-110dBm Third Inter-Modulation Harmonic Distortion Non-Harmonic Spurious <-93dBm, 1MHz ~ 15MHz, Ref.Level @-30dBm

(Span = 50kHz, RBW = 3kHz) GENERAL Display 640 x 480 high resolution TFT color LCD Split Windows Active Window: Upper, Lower or Alternate (two simultaneously sweeping windows) Markers 10 Markers for peaks: 5 normal-delta marker pairs
Functions: Delta, To Peak, To Minimum, Peak Track, Peak Table, Peak Sort Trace Detection 3 traces with Peak, Maximum hold, Freeze, Average, Trace math Power Measurement ACPR, OCBW, Channel Power, N dB and Phase Jitter Autoset Function Auto tuning the measurement result for observation Trigger Conditions: Video, External (Positive-going, +5V TTL external signal)
Mode: Normal, Single, Continuous
Sequence Automated test by user-defined macros without any remote controller, 10 Sequential macro set and 10 macros per each set, Variable delays and wait-to-go facilitate automated measurement, Do-sequence links and nests different sequence sets. CONNECTORS RF Input
N female, 50Ω nominal
RF input VSWR: <2:1, @0dBm Reference Level External Reference Type: BNC female Clock Input 1M, 1.544M, 2.048M, 5M, 10M, 10.24M, 13M, 15.36M, 15.4M, 19.2MHz Reference Clock Output Type: BNC female, 10MHz DC Input (DC Power Operation) Jack : 5.5mm, 12V DC Output (for GAP-801) Type: SMB Male, outputs +9V/100mA Max. INTERFACE RS-232C Sub-D 9 pins female USB Connector USB Host/Device full speed supported VGA Output Front panel: Type A receptacle for USB flash devices Option: GPIB Interface Fully programmable with IEEE 488.2 compliance POWER SOURCE     AC 100 ~ 240V, 50/60Hz ACCESSORIES   User Manual x 1
Power Cord x 1
USB Cable (Type A plug to Type mini-B plug) x1 DIMENSIONS & WEIGHT   330(W) x 170(H) x 340(D) mm
Approx. 6kg