
Detail GW INSTEK – SPS
The SPS-Series are single output, 360W, switching DC power supply. OVP protects the SPS-Series and their load from unexpected conditions. High regulation is maintained at 0.01%. Remote sensing adds extra level of precision by compensating cable losses between loads. Turning the output On/Off from external device is available through remote control terminals. The SPS-Series are an ideal solution for power-efficient bench-top or portable applications requiring high regulation.
Specification
OUTPUT
SPS-1230
SPS-1820
SPS-2415
SPS-3610
SPS-606
Voltage 0~12V 0~18V 0~24V 0~36V 0~60V
Current 0~30A 0~20A 0~15A 0~10A 0~6ACONSTANT VOLTAGE OPERATION
Line Regulation
< 5mV
Load Regulation
< 5mV
Ripple & Noise
< 5mVrms, 100mVp-p 20Hz ~ 20MHz
Recovery Time
< 500μS ( 50% Load change, Minimum load 0.5A )
Temp. Coefficient
< 100 ppm/°C
Output Range
0 to rating voltage continuously adjustable
CONSTANT CURRENT OPERATION
Line Regulation
< 3mA
Load Regulation
< 3mA
Ripple Current
< 3mArms (SPS-606)
< 5mArms (SPS-3610)
< 10mArms (SPS-2415)
< 10mArms (SPS-1820)
< 30mArms (SPS-1230)
Output Range
0 to rating current continuously adjustable (Hi/Lo range switchable)
METER
Type
3 1/2 Digit 0.39″ LED Display
Accuracy
±( 0.5% of rdg + 2 digits )
INSULATION
Chassis and Terminal
20MΩ or above (DC 500V)
Chassis and AC Cord
30MΩ or above (DC 500V)
POWER SOURCE
AC 115V/230V ±15%, 50/60Hz
DIMENSIONS & WEIGHT
128(W) x 145(H) x 285(D)mm
Approx. 3.2kg