PT. SRIAYU MULTI KREASI

Jln. Hayam Wuruk No. 2-5

Gedung Harco Glodok Lantai 5 Blok A.42 - Jakarta Barat

PT. SRIAYU MULTI KREASI

Hioki Clamp On Hitester 3280-10


Detail Hioki Clamp On Hitester 3280-10

Specifications
AC Current range
(0.06 ) – 42.00 / 420.0 / 1000 A
(±1.5 % rdg. ±5 dgt. at 50 or 60Hz)
DC Voltage range
420.0 m / 4.200 / 42.00 / 420.0 / 600 V
(±1.3%rdg.±4dgt.)
AC Voltage range
4.200 / 42.00 / 420.0 / 600 V
(±2.3%rdg.±8dgt.)
Resistance
420.0 / 4.200 k / 42.00 k / 420.0k / 4.200 M / 42.00 MΩ
(±2.0%rdg.±4dgt.)
Continuity
420.0 Ω (±2.0%rdg.±6dgt.)
(Buzzer sounds at approx 50 Ω or less )
Frequency characteristics
(at AC current / voltage)
AC current: 50/60 Hz
AC voltage: 50 to 500 Hz
Display section
Digital / LCD, maximum 4199 digit
Sampling rate
2.5 times/sec or 1 times/3 sec
Max. circuit voltage
600 V AC rms (insulated wire)
Power supply
CR2032 (3 VDC) × 1, Continuous use 150 hours
Core jaw diameter
33 mm(1.30 in)
Maximum rated voltage to earth
CAT III 600 V (Current measurement section),
CAT III 300 V, CAT II 600 V (Voltage measurement section)
Effect of conductor position
within ±5.0 % in any direction from the center of sensor
Overload protection
DCV/ACV – 600 V DC /AC rms;
ohms/continuity – 250 V AC rms
Power source
CR2032 battery x 1 (3V DC)
Continuous operating time
approx. 150 hours
Weight
22.44 oz (636 g)

Have any Question or Comment?

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

PRODUK KAMI

VISITOR