Detail Hioki Digital Hitester 3255-50

Specification

Regarding DMM Accuracy
Due to the many ranges and functions available in a DMM, only the basic accuracy is indicated for reference. Please refer to the individual catalogs for detailed accuracy information.

DC voltage

419.9 mV to 1000 V, 5 ranges, Basic accuracy: ±0.5% rdg. ±4dgt.

AC voltage 50 to 500Hz

419.9 mV to 1000V, 5 ranges, Basic accuracy: ±1.2% rdg. ±4 dgt. (Average rectified)

Resistance

419.9 Ω to 41.99 MΩ, 6 ranges, Basic accuracy: ±0.7% rdg. ±4 dgt.

AC current 50 to 500Hz

Use with optional Clamp-on probes, Display the actual current value by scaling the sensor’s 0.2 VAC f.s. output. Basic accuracy: ±2.0 % rdg. ±4 dgt. plus clamp-on probe’s accuracy

Continuity buzzer

Threshold 50 Ω ± 40 Ω or less, Open terminal voltage: 3.4 V or less

Diode check

Open terminal voltage: 3.4 V or less, Testing current 850 μA or less

Auto power save

Yes (Cancel possible)

Display

Digital LCD, max. 4199 digits

Sampling rate

2.5 times/s

Other functions

Hold auto

Protection rating

IP 54 (EN 60529)

Protection structure

Protected against internal short-circuit with protective resistor (5 Ω current-limiting resistor) and built-in 0.44 A fuse (1000 VAC/10 kA interrupting capacity)

Power supply

R03 (AAA) manganese battery ×2, Continuous use: 200 hours
LR03 (AAA) alkaline battery ×2, Continuous use: 500 hours

Dimensions and mass

70 mm (2.76 in) W × 145 mm (5.71 in) H × 31 mm (1.22 in) D, 210g (7.4 oz) (including batteries)

Accessories

Instruction manual ×1, R03 (AAA) Manganese batteries ×2 (for trial purposes only), Test Lead L9207-10×1, Carrying case 9371 ×1