PT. SRIAYU MULTI KREASI

Jln. Hayam Wuruk No. 2-5

Gedung Harco Glodok Lantai 5 Blok A.42 - Jakarta Barat

PT. SRIAYU MULTI KREASI

Hioki PW3198 Power Quality Analyzer


Detail Hioki Power Quality Analyzer PW 3198

The PW3198 is a power quality analyzer for monitoring and recording power supply anomalies, allowing their causes to be quickly investigated, and also for assessing power supply problems such as voltage drops, flicker, harmonics, and other electrical issues.

Key Features :

  • Verify power problems in accordance with the IEC61000-4-30 Class A standard
  • High accuracy and continious gapless recording ( V:±0.1% of nominal voltage, A and W : ±0.2% rdg. ±0.1% f.s
  • CAT IV 600V-safe enough for incoming power lines
  • Broadband voltage range lets you measure even high-order harmonic components of up to 80 kHz
  • Wide dynamic range from low voltages up to 1300V (3P4W line to line voltage)
  • Maximum 6000V transient overvolatge up to 700kHz
  • LAN, USB and SD card interfaces
  • Optional GPS BOX for synchronizing multiple devices

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

  • Measurement line type
    Single-phase 2-wire, Single-phase 3-wire, Three-phase 3-wire or Three-phase 4-wire plus one extra input channel (must be synchronized to reference channel during AC/DC measurement)
  • Voltage ranges
    Voltage measurement: 600.00 V rms
    Transient measurement 6.0000 kV peak
  • Current ranges
    500.00 mA to 5.0000 kA AC (depends on current sensor in use)
  • Basic accuracy
    Voltage: ±0.1% of nominal voltage
    Current: ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy
    Active power: ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy
  • Measurement items
    1. Transient over voltage : 2 MHz sampling
    2. Frequency cycle : Calculated as one cycle, 40 to 70 Hz
    3. Voltage (1/2) RMS: one cycle calculation refreshed every half cycle
    Current (1/2) RMS: half-cycle calculation
    4. Voltage swell, Voltage dips, Voltage interruption
    5. Inrush current
    6. Voltage waveform comparison
    7. Instantaneous flicker value: As per IEC61000-4-15
    8. Frequency: Calculated as 10 or 12 cycles,40 to 70 Hz
    9. 10-sec frequency: Calculated as the whole-cycle time during the specified 10 s period, 40 to 70 Hz
    10. Voltage waveform peak, Current waveform peak
    11. Voltage, Current, Active power, Apparent power, Reactive power, Active energy, Reactive energy, Power factor, Displacement power factor, Voltage unbalance factor, Current unbalance factor (negative-phase, zero-phase)
    12. High-order harmonic component (voltage/ current): 2 kHz to 80 kHz
    13. Harmonic/ Harmonic phase angle (voltage/ current), Harmonic power: 0th to 50 th orders
    14. Harmonic voltage-current phase angle: 1th to 50 th orders
    15. Total harmonic distortion factor (voltage/ current)
    16. Inter harmonic (voltage/ current): 0.5 Hz to 49.5 Hz
    17. K Factor (multiplication factor)
    18. IEC Flicker, Δ V10 Flicker
  • Record
    55 weeks (with repeated recording set to [1 Week], 55 iterations)
    35 days (with repeated recording set to [OFF])
  • Interfaces
    SD/SDHC card, RS-232C, LAN (HTTP server funtion), and USB2.0
  • Display
    6.5-inch TFT color LCD (640 × 480 dots)
  • Power supply
    AC Adapter Z1002 (12 V DC, Rated power supply 100 V AC to 240 V AC, 50/60 Hz)
    Battery Pack Z1003 (Ni-MH 7.2 V DC 4500 mAh)
  • Dimensions and mass
    300 mm (11.81 in) W × 211 mm (8.31 in) H × 68 mm (2.68 in) D (excluding protrusions), 2.6 kg (91.7 oz) (including battery pack)
  • Accessories
    Instruction manual × 1, Measurement guide × 1, Voltage Cord L1000 × 1 set (Red/Yellow/Blue/Gray, each 1, Black × 4, Alligator clip × 8), Spiral tube × 20, Input Cable Labels × 1, AC Adapter Z1002 × 1, Strap × 1, USB cable (1 m 3.28 ft length) × 1, Battery Pack Z1003 × 1, SD memory card 2GB Z4001 × 1

Have any Question or Comment?

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

PRODUK KAMI

VISITOR