Jln. Hayam Wuruk No. 2-5

Gedung Harco Glodok Lantai 5 Blok A.42 - Jakarta Barat


Hioki PW3360 Clamp On Power Logger

Detail Hioki PW3360 Clamp On Power Logger : 

  • Supprots single to three-phase, 4 wire circuits
  • Measure between 90V to 780V
  • Simultaneously measure up to three single-phase , 2-wire circuits (in the same power system)
  • Slim, compact design that can be placed anywhere
  • Store months of data on SD cards
  • The QUICK SET function guides you in making the right connections
  • Choose PW3360-21 for harmonic measurements up to the 40th order
  • WHM (watt-hour meter) connection checking function installed

Specifications :

  • 50/60 Hz, Single phase 2 wires (1/2/3 circuits), single phase 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only  : 1 to 3 channels
  • Measurement items : Voltage RMS, current RMS, voltage fundamental wave value, current fundamental wave value, voltage fundamental wave phase angle, current fundamental wave phase angle, frequency (U1), voltage waveform peak (absolute value), current waveform peak (absolute value), active power, reactive power (with lag/lead display), apparent power, power factor (with lag/lead display) or displacement power factor (with lag/lead display), active energy (consumption, regeneration), reactive energy (lag, lead), energy cost display, active power demand quantity (consumption, regeneration), reactive power demand quantity (lag, lead), active power demand value (consumption, regeneration), reactive power demand value (lag, lead), power factor demand, pulse input
    [PW3360-21 only]: Harmonic voltage level, harmonic current level, harmonic power level, content percentage, phase angle, total harmonic distortion (THD-F or THD-R), up to 40th order
  • Voltage ranges : 600V AC (Effective measurements range 90.00 V to 780.00 V)
  • Current ranges :
    500.00 mA to 5.0000 kA AC (depends on current sensor in use)
    50.000 mA to 5.0000 A AC (Leak clamps on sensor only)
  • Power ranges : 300.00 W to 9.0000 MW (depends on voltage/current combination and measured line type)
  • Basic accuracy :
    Voltage : ±0.3% rdg. ±0.1% f.s
    Current : ±0.3% rdg. ±0.1% f.s + clmap sensor accuracy
    Active power : ±0.3% rdg. ±0.1% f.s  + clmap sensor accuracy (at power facto = 1)
  • Display update rate : 0.5 sc (except when accessing SD card internal memory or during LANUSB communication)
  • Save destination : SD memory card, or internal memory at real time
  • Data save internal : 1 sec to 30 sec, 1 minute to 60 minutes, 14 selections
  • Save items : Measurement value save : Average only/Average, Max/Min. value (PW3360-21-only): Harmonic data save:Average only/average, max/min. value in binary format, Screen copy: BMP form (saved every 5 min. at minimum interval time), waveform save: Binary waveform data
  • Interfaces :
    SD/SDHC memory card
    LAC 100BASE-TX: HTTP server function, remote settings via communication program, data download USB 2.0. When connected to a PC the SD card and internla memory are recognized as removebale storage devices, remote settings via communication program, data download.
    Pulse output : Proportional to active power consumption when measuring integral power consumption, isolated open-cilletor signal
  • Functions : Connection check, Quick set navigation guide, clock, pulse input
  • Power supply :
    AC Adapter  Z1006: (100 to 240 V AC, 50/60 Hz), 40 VA (including AC adapter)
    Battery pack 9459 : (DC 7.2 V 3 VA, charging time 6 hr 10 m), 8 housr of continious use (with back light off)
  • Dimensions and mass :
    W180 X H100 X D48 mm, 550g (without PW9002)
    W180 X H100 X D67.2 mm, 830g with PW9002

Have any Question or Comment?

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *