PT. SRIAYU MULTI KREASI

Jln. Hayam Wuruk No. 2-5

Gedung Harco Glodok Lantai 5 Blok A.42 - Jakarta Barat

PT. SRIAYU MULTI KREASI

Hioki SS7012 DC Signal Source


Detail Hioki DC Signal Source SS7012 :

  • Improved stability and lower calibration costs
  • Conduct loop testing of instrumentation systems (4-20 mA)
  • Validate thermostatic devices and distributors
  • Use as a calibrator and low-power generator for production facilities maintenance and electronic device evaluation.
  • Simultaneously sources up to ± 25 V and ±25 mA while measuring up to ±28 V and ±28 mA (DC)
  • Eight thermoelectromotive force sourcing (TC) modes (K,E,J,T,R,S,B and N)
  • TEMP measurement from -25 to 80°C
  • Improved stability and lower calibration costs
  • Control from a PC via USB connection

General Specification :

  • Source output method : Bipolar sink/source
  • A/D conversion method : Delta-Sigma
  • Temperature coefficients (sourcing) :
    ± (0.005% of setting + 30 µV)/ °C (CV : 2.5 V)
    ± (0.005% of setting + 0.2 mV)/ °C (CV : 25 V)
    ± (0.005% of setting + 0.2 µA)/ °C (CC : 25 mA)
    ± (0.005% of setting + 0.05°C)/ °C (TC(°C) : K,E,J,T,R,S,B and N)
    ± (0.005% of setting + 0.1 °C)/ °C (TC(°C) : R,S, and B)
    ± (0.01% of setting + 0.1°C)/ °C (TC(RJ) : K,E,J,T,R,S,B and N)
    ±0.005% Ω/  °C (Rs)
  • Temperature coefficients (measuring) :
    ±(0.005% rdg. + 10 µV) / °C (V: 2.5V)
    ±(0.005% rdg. + 0.1 mV) / °C (V: 25V)
    ±(0.005% rdg. + 0.1 µA) / °C (A: 25mA)
    ±0.05 °C / °C (TEMP)
    ±(0.01% rdg. + 1 µA) / °C (MONITOR CV: 2.5V and 25V)
    ±(0.01% rdg. + 1 mV) / °C (MONITOR CC: 25mA)
    ±0.05 °C / °C (MONITOR TC (RJ))
  • Zero adjustment function : within ±100 counts (V,A and measuring)
  • Display : Five-digit LCD (“28000”)
  • Additional functions :
    Overflow display, USB communication, Monitor Operating temperature and humidity : 0 to 40°C, 80% RH or less (non-condensing)
  • I/O protection : 50 mA, fused (sourcing and measuring)
  • Withstand voltage : 370 Vrms AC @ 1 mA for 15 seconds (source to measurement terminals)
  • Power supply : Four LR6 alkaline batteries or HR6 Ni-MH batteries, or 9445-02/-03 AC ADAPTER
  • Continious operating time :  (w/fully charged 2500-mAh Ni-MH batteries)
    Approx. 200 min (CC: 25mA range, sourcing 20 mA into 250 Ω load)
    Approx. 170 min (CV: 25V range, sourcing 25 V into 1 kΩ load)
    Approx. 280 min (V: 2.5V range, input terminals shorted)
  • Dimensions and mass : 104x180x58mm, 660g (including LR6 x 4 batteries)

Have any Question or Comment?

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

PRODUK KAMI

VISITOR