
Detail KYORITSU 2000 Digital Multimeter with AC/DC Clamp Sensor :
- Capable of measuring AC and DC currentss up to 60A with open Clamp Sensor
- 3400 counts with bargraph display
- Pocket size and heavt suty design
Specifications :
- DC V
340mV/3.4/34/340/600V (Input Impedance: 10MΩ)
±1.5%rdg±4dgt - AC V
3.4/34/340/600V (Input Impedance: 10MΩ)
±1.5%rdg±5dgt [50 – 400Hz] - DC A
60A ±2%rdg±5dgt - AC A
60A ±2%rdg±5dgt (50/60Hz) - Ω
340Ω/3.4/34/340kΩ/3.4/34MΩ
±1%rdg±3dgt (0 – 340kΩ)
±5%rdg±5dgt (3.4MΩ)
±15%rdg±5dgt (34MΩ) - Continuity buzzer
Buzzer sounds below 30±10Ω
(Continuity buzzer works on 340Ω range only) - Frequency
(AC A) 3.4/10kHz ±0.1%rdg±1dgt
(AC V) 3.4/34/300kHz ±0.1%rdg±1dgt
(Input sensitivity Current: more than 15A, Voltage: more than 30V) - Conductor size
φ6mm max. - Withstand Voltage
3700V AC for 1 minute - Applicable standards
IEC 61010-1 CAT III 300V Pollution degree 2
IEC 61010-031, IEC 61010-2-032, IEC 61326-1 - Power Source
R03 (DC 1.5V) × 2
* Continuous measuring time: approx. 45 hours
(Auto power save: approx. 10 minutes) - Dimensions
128(L) × 87(W) × 24(D)mm - Weight
210g approx. - Accessories
R03 (DC 1.5V) × 2, Instruction Manual
Optional
9107 (Carrying case [Soft])