Product Description

The PIE 211 Multiple RTD Type Calibrator is functionally equivalent to similar calibrators with five digit displays, knobs and switches.

The PIECAL 211 gives you advantages of an updated design while maintaining the familiar, time proven ease of use of similar calibrators. Choose the Practical Instrument Electronic 211 and get an RTD calibrator with a backlit display, a rubber boot and rugged switches.

Specification

Automated RTD Calibrator PIECAL 211 – Updated for 2016

    • Calibrate with Ease
      Resolution to 0.1 °F & °C; Accurate to 0.2°
    • Source and Read Multiple RTD Curves plus Ω
      Platinum 100 Ω: 1.3850, 1.3902, 1.3926
      Platinum 1000 Ω: 1.3850, 1.3750 (Pt 1000 Ω limited to 266.0°C/511.0°F)
      Copper 10 & 50 Ω; Nickel 120 Ω;0.00 to 2001.0 Ω
      Custom ranges available – consult factory
    • Automatically Detect 2, 3 & 4 Wire Connections
      Troubleshoot sensor connections & find broken wires with patented technology. Easy hookups – all connections are indicated on the display.
    • Guaranteed Compatible with all Instrumentation
      Works with Rosemount & Honeywell Smart Transmitters, PLCs, DCSs, Multi-channel Recorders and other pulsed excitation devices.
    • Faster Calibration
      Instantly select three outputs with EZ-CHECK switch
      Easily find trip points with two speed EZ-DIAL knob & Automatic Stepping
    • Easily Change RTD Types & Scale
      Double click to select RTD Type & °F & °C
    • Easy-to-Read Display
      Turn on the backlight to read in dark areas of the plant
    • Simple “No Tool” Battery Changes
      Four inexpensive “AA” batteries
    • Use in the Plant, Field or Shop
      Includes Red Rubber Boot and RTD Wire Kit (020-0208)

Advantages of the PIECAL 211 over the Altek 211

    • Compatible with Newer Instrumentation
      Works with Rosemount & Honeywell Smart Transmitters, PLCs, DCSs, Multi-channel Recorders and other pulsed excitation devices. Higher accuracy at low excitation curents.
    • Automatic Stepping
    • Larger Display with Backlight
      Easy viewing in dark locations
    • More Resistant to Accidental Damage
      Rubber Boot and Stronger Switches
    • Separate Battery Compartment
      No more removing housing with screwdriver to replace batteries
      Calibration seals remain intact
    • Easily Change RTD Types
      Reconfigure without resetting calibrator
    • Includes Certificate of Calibration
      All PIECAL Calibrators come with a free signed and dated certificate. Altek’s come only with an unsigned Statement of Calibration Practices with a certificate of calibration available for an extra charge.